User manual

pdfcrowd.com
Your watch has to be paired via Bluetooth with your mobile device before you can use it. It can only
be paired with one mobile device at a time.
Follow these steps to pair your watch to your iOS Mobile Device:
1. On your iOS Mobile Device:
a. Download the Martian mVoice App – Go to the App Store; search for
“Martian mVoice”. Do not download the ORANGE Martian Notifier App as it
will not work with your watch.
b. Turn on Bluetooth – Go to Settings > Bluetooth on your mobile device. Turn
on Bluetooth by toggling the switch to the right. Bluetooth is on if the switch is green.
2. On your watch:
a. Turn on your watch – Press and hold the bottom button for 2 seconds.
3. On your iOS Mobile Device:
a. Open the Martian mVoice app, follow the step-by-step guide to pair your Martian Watch.
b. At the pairing mode stage – Press and hold the top button until “Pair Ready” appears on the
display of your watch. “Pair Ready” must appear on the Watch until both Watch and mobile device
are paired. If the mode times out, repeat this step.
c. Accept “Bluetooth Pairing Request” – A pop-up window will appear on your mobile device,
telling you that Martian Watch would like to pair with your mobile device; Tap “Pair” to complete the
pairing process. If the codes do not match, tap “Cancel” and try again. If the pairing process is
successful, the watch will vibrate and read “Paired to [device name])”.
d. Accept “Martian Smart Request” – Starting with Version 1.46 of the Martian Alerts App and
Firmware Version 2.17 (see updating your watch Firmware below) an additional Bluetooth
connection is required in order to provide both Notifications and Voice to your watch. This
connection is called “Martian Smart” and a final pop-up menu comes up after hitting “Continue” on
your Martian mVoice app. Tap “Pair”. If successful, the watch will vibrate and read “Paired to