User manual

pdfcrowd.com
When the watch establishes a connection with some Android phones after a quick off/on, the audio
links and turns on. Just tap the top button on your watch to turn it off.
On an incoming call, the OLED display briefly displays the caller’s phone number, then
switches to the caller’s name as shown in your address book.
Some Android phones transfer the information so quickly to the watch that it shows up this way –
phone number, then caller name.
You are standing in an open area like a parking lot, or you have your phone in your back
pants pocket, and your phone reception is not good.
Open fields and “body loss” are the two main causes of reduced Bluetooth range between your
watch and cell phone. If in an open area, move closer to an object such as a car or building, and
reception will improve. If your phone is in your back pocket, try turning your phone upside-down,
move it to the opposite side, or put it in your front pocket – any of these may improve your
connection.
Your Bluetooth 3.0 +HS (high speed) device doesn’t work with your watch
Your Bluetooth 3.0 device may not be compatible with non-WiFi devices – MARTIAN WATCHES
don’t support HS.
You were talking on your phone and walked into another room, away from your watch –
suddenly, your call transferred to the watch
You went out of range of the watch momentarily, and when the watch and phone reconnected, the
Bluetooth settings stepped in and transferred your call. This is a function of Bluetooth – the way to
avoid this is to turn your watch off when you aren’t using it.
You received a text message on your iPhone, but only received a green flashing light – no
vibration or display
You will experience this if the iMessage server is down. Go to Settings/Messages and turn off
iMessage, and send yourself a text to see if this resolves the problem. If it does, then you can
continue to receive text messages this way until the iMessage server is back online. Check the
Apple website for more information about how to check iMessage System Status.
When speaking to someone on MARTIAN WATCH, the person on the receiving end
experiences your voice “cutting in and out”