User manual

pdfcrowd.com
The background noise on the receiving end may be too loud, so MARTIAN WATCH can’t
differentiate between the person’s voice and the background noise. This causes the Watch’s
microphone to think the person is speaking, which in turn cuts off your speech. If the person on the
receiving end moves to a quieter location, this should resolve.
On Android phone, Caller ID shows Address Book names for texts, but MARTIAN WATCH
only shows phone numbers for incoming calls
Caller ID for incoming calls comes from the phone itself, so the phone dictates whether you see the
Address Book name or only the phone number. For texts, if your Android phone doesn’t support
the Bluetooth MAP profile, caller ID comes through the MARTIAN App. Since the App connects to
your Address Book, it allows you to receive the caller’s name on your Watch.
Watch doesn’t reconnect to phone after returning into range
The Watch attempts to connect periodically when you are out of range. Press any button on your
Watch to reconnect manually.
• If your phone settings have an option to “always allow” or “always ask”, check to make sure you
chose the “always allow” option. If you previously chose “always ask”, press the “always allow”
button when prompted by your phone.
• Verify you are in range by pressing the bottom button to view the status bar – the icon will appear
if the Watch is in range of the phone. Note: Solid obstacles reduce the range of the Watch, and
some phone cases reduce the phone’s Bluetooth range.
• Check to see if your Watch has disconnected from your phone. If so, re-pair the Watch to your
phone following instructions in the Pairing section above.
Red battery light doesn’t turn on when Watch is plugged in to charger
Make sure the micro-USB connector is securely seated in the Watch’s port, and the USB adapter
is connected to a working power outlet or the USB port of a computer that is charged and turned
on.
Text message notification/display not working
• The Watch attempts to connect periodically when you are out of range. Press any button on your
Watch to reconnect manually.
• If your phone settings have an option to “always allow” or “always ask”, check to make sure you