User manual

pdfcrowd.com
NOTE:
Because your watch is accessing your mobile device’s Voice Command features, it can only
execute commands that your specific mobile device is capable of executing. See your mobile
device’s Voice Command instructions to find out which commands it can accept.
Calls
Incoming Call:
When the mobile device is receiving an incoming call, the Watch vibrates repeatedly and the
Watch LED light flashes green. The name or number of the caller is displayed on the Watch’s
OLED display.
To answer press the top button. To reject the call and send it to Voicemail press the bottom button
and the OLED will display “Call Declined”.
When finished with the conversation, press the top button to end the call. The OLED will display
“Call Ended”.
Outgoing Call:
Tap the top button. The Watch LED light will flash green to acknowledge a Voice Command
request. Wait for the Watch to Beep then speak the desired Voice Command supported by your
mobile device for Outgoing Calls.
NOTE: The Outgoing Call feature is available on your watch only if your mobile device supports
Voice Commands for Outgoing Calls.
Call Volume and Mute:
To change the Volume of a call on the Watch press the bottom button to set the preferred Volume.
The volume options are: Low (1), Medium (2), High (3) and Clear Voice (C).
At the Clear Voice (C) volume, a tap of the bottom button will cause the Watch to vibrate indicating
that the Watch is at the Clear Voice setting. Tap the bottom button again to reach the Low (1)
setting.
To mute the Watch microphone during an active call, press and hold the bottom button until the
“mute” (microphone with a line through it) icon appears on the OLED display. To un-mute press
and hold the bottom button again until the “active” microphone icon appears.
Text Messages