User's Manual

choice may be for convenience or safety. The default setting is “OFF”,
allowing longer notifications. To choose the 40-character maximum, tap the
toggle button to “ON”. Tap “save” to save changes.
Bold Number: Activate this option to see bold numbers on your watch. This
feature is helpful to see numbers in bright sunlight or to easily see your
progress while on the move with fitness apps.
Enable Restriction Lock: This feature allows you to “lock” the 40-character
limit into place and require a password to change the setting. (This can be
used, for example, to make certain teens are not tempted to read long
messages while driving.) To enable:
Tap the > next to Character Limit. Tap the toggle button to “ON” (orange).
Enter a 4-digit numeric passcode, and enter it a second time to confirm.
Tap “Save” to enable the Restriction Lock.
IMPORTANT: DO NOT FORGET YOUR 4-DIGIT PASSCODE! IF YOU
LOSE IT, YOU CANNOT UNLOCK THE CHARACTER RESTRICTION
YOURSELF. YOU MUST SEND THE WATCH TO MARTIAN WATCHES
TO UNLOCK IT. THIS IS NOT COVERED UNDER WARRANTY – SEE
“SERVICE & REPAIR FOR OUT-OF-WARRANTY PRODUCTS”
SECTION OF http://www.martianwatches.com/warranty/ FOR MORE
INFORMATION.
!
Help Tab
Note: Each of the features below (except signal strength) requires a
connection to the Internet: