User's Manual

Settings Tab
On this tab you can change your Martian Notifier watch settings.
Choose Language: Tap to choose the language in which you would like
your watch menu items to appear. Tap “save” to save changes.
Enable LED: Enable or disable the red/green/blue LED light that flashes
when notifications appear on your watch by tapping the toggle button to
“ON” or “OFF”. Tap “save” to save changes.
Enable Leash: Enable or disable the Martian Leash by tapping the toggle
button to “ON” or “OFF”. (See Martian Leash in Watch Menu section for
further explanation.) Tap “save” to save changes.
Choose Date Format: Choose the way you want the date to be displayed;
mm/dd or dd/mm. Tap “save” to save changes.
Choose Time Format: Choose the way you want the digital time to be
displayed; either 12-hour (1:00-12:00 for AM and PM) or 24-hour (i.e. 11:00,
12:00, 13:00, 14:00) time format. Tap “save” to save changes.
Scroll Speed: Your messages scroll across the OLED display on your
watch. Tap on Scroll Speed to choose a speed from 1 to 4; where 4 is the
fastest. Tap “save” to save changes.
Alert Scroll Delay: When a message first appears on your OLED display, it
pauses on the sender name before it starts scrolling the message. Tap Alert
Scroll Delay to choose the length of the pause, from 2 to 4 seconds. Tap
“save” to save changes.
Character Limit: You may choose whether you want to only receive the first
40 characters of incoming notifications, or more than 40 characters. This