User's Manual

Tap to Connect – You can connect and disconnect the App from the watch
with this toggle.
Do Not Disturb: Can also be activated and deactivated on the Watch Menu.
Activating DND will turn off all incoming notifications but still display Status
Bar icons and information, and will also keep silent alarms active. For
example, turning on DND will allow you to wake up to the vibration of a silent
alarm, but it will not vibrate on an incoming text message. Tap on the word
“OFF” to turn it to “ON”.
Note: If you turn DND to “On”, you MUST later return to DND either in the
App or on the Watch Menu and turn it to “OFF” in order to begin receiving
notifications again.
Watch Battery: Informs you of Martian Notifier’s current battery level.
Set Alert Vibration Intensity – This feature sets the vibration level on your
watch. Set vibration intensity by sliding the button across the bar. Over time
you will be able to find the setting most comfortable to you and the
environment you are in. You may sometimes want it lower in a classroom,
office or theater; or increase the intensity when you are in an active
restaurant or sporting event and want a more pronounced vibration.
Hour Repeater – This feature sends a double-vibration alert to your watch
at a given minute of every hour during the range of hours you select. For
example, you might have choose to have an alert titled “Stretch!” sent 5
minutes before every hour between 9 am and 4 pm. To set up your Hour
Repeater, tap on the > to enter options:
Target minute – Choose “target minute” of each hour when you want to
receive an alert (for example, if you choose “35”, you will receive an alert at