User guide

pdfcrowd.com
Your iOS mobile device will then display the Home page of the Martian Alerts App. If not already
connected, tap the switch to Connect the App to your watch. At the top of the screen you should see
“Watch and app are connected.”
d. Accept “Bluetooth Pairing Request” – Starting with Version 1.46 of the Martian Alerts App and
Firmware Version 2.17 (see updating your watch Firmware below) an additional Bluetooth
connection is required in order to provide both Notifications and Voice to your watch. This
connection is called “Martian Smart” and a final pop-up menu comes up after the Martian Alerts App
is opened on your mobile device. Tap “Pair”. If successful, the watch will vibrate and read “Paired to
Smart”. The final pop-up may take up to 60 seconds to appear on your mobile device.
Unpairing watch from your iOS Mobile Device
Once paired, if you wish to use your watch with a different device, you need to un-pair it from the
current mobile device and start a new pairing procedure with the next mobile device. To un-pair on
iOS, go to Settings > Bluetooth > Martian Watch > Tap the i icon > Forget This Device > Forget
Device. You must also remove the Martian Smart device from your mobile device.
TOP
Pairing watch to your Android Mobile Device
Your watch has to be paired via Bluetooth with your mobile device before you can use it. It can only
be paired with one mobile device at a time.
Follow these steps to pair your watch to your Android Mobile Device:
1. On your Android Mobile Device:
a. Download the Blue Martian Alerts App – Go to the App Store; Search for
“Martian Alerts App”; Download the BLUE Martian Alerts App to your device.
Do not download the ORANGE Martian Notifier App as it will not work with
your watch.
b. Turn on Bluetooth – Go to Settings > Connections > Bluetooth on your
mobile device. Turn on Bluetooth by tapping the switch to the right. Bluetooth is on if the switch is
green.
2. On your watch:
a. Turn on your watch – Press and hold the bottom left button for 2 seconds.
b. Enter pairing mode on the watch – Press and hold the top button until the PIN code “0000”