User guide

pdfcrowd.com
possible statuses are “Connected”,
“Disconnected”, and “Connecting”.
Do Not Disturb:
This switch sets Do Not Disturb to On (blue)
or Off (white). If Do Not Disturb is On (blue)
the Watch will only receive Silent Alarms. No
other Notifications or Messages will be received on the Watch.
Set Vibration Intensity
This slider sets the Vibration Intensity level of messages coming through on the
Watch. Set vibration intensity by sliding the button back and forth across the bar.
Hour Repeater
This switch sets the Hour Repeater to On
(blue) or Off (white). The Hour Repeater
sends a double-vibration alert to your watch
at the Target Minute of every hour during the
range of hours selected. For example, create
an alert labelled “Stretch!” sent 5 minutes
before every hour between 9 a.m. and 4 p.m.
To set up the Hour Repeater, tap on the > to
enter options:
Target Minute
Tap the number to select a Target Minute
between 0 and 55. For Example, if “35” is
selected, the Watch will alert at 1:35, 2:35,
3:35, etc.
Active From and Active To
Tap the time to select the time range that the
Hour Repeater is active throughout the day.
Label (Optional)
Tap the > to assign a Label to the Hour Repeater. This Label will display on the
Watch.
Save
Press the Save button in the top right of the screen to Save the Hour Repeater and