Installation Guide

Using Camlocks
1
2
DO NOT OVER TIGHTEN.
3
4
4
Step 1
Step 3
Step 2
Step 4
Connect the male camlock
as diected in the assembly
instructions using a
scewdriver.
Push the male camlock
into the entry hole.
Insert the female camlock
as shown in the
instruction.
Note：ensure that the
arrow on the top of the
camlock points towards
the entry hole for the
male camlock.
Turn the female camlock
clockwise with a
screwdriver.
You should feel a click
when the camlock is
locked in place.
The joint is now secure.
Adjusting Hinges
Hinge adjustment:
a: To move the top panel up or
down, loosen screws shown
and move top panel to suit
b.To move the top panel in or
out, loosen screws shown and
move top panel to suit.
Retighten screws
C:To move the top panel left
or right, adjust screws shown.
b:
a:
c: