Installation & Assembly

Page 2 of 2
 Note:
Turn the power off (unplug from the wall outlet) before replacing the bulb. Make sure the bulb has sufficient time to cool
down.
Assembly Instruction:
Step1. Unpack and place all parts on a surface or floor.
Step2. Put Lamp Base (E) on a Flat surface.
Step 3. Connect 3pcs metal rods (D) to the base(E) step by step.
Step 4. Raise The Harp (B) and insert the bottom ends of Harp into the Saddle.
Step5. Place the Shade(A) onto top of Harp (B) and tighten with Finial (C).
Step6. Screw light bulb into the Socket.
Step7.Assembly is completed.
Care instructions:
• Wipe with soft dry cloth only
• Always avoid the use of harsh chemicals or abrasive as they may damage to the finish.
Thank you for your purchase