SDS

Page 3 of 7
Issuing date: January 5, 2024
Packing material: No relevant information.
8. Exposure controls/personal protection
Occupational Exposure Limits:
OSHA PEL-TWA
ACGIH TLV-TWA
3.5 mg/m
3
3 mg/m
3
Total dust: 15 mg/m
3
Respirable fraction: 5 mg/m
3
--
1000 ppm
1000 ppm (1880 mg/m
3
)
Engineering Controls:
Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended
exposure limits.
Install washer eyes and safety showers near to the handling and storage area.
Personal Protective Equipment (For workers):
Protection of Hands: Recommend wearing protective gloves for industrial hygienic purpose.
Protection of Eyes: No special requirements under normal conditions. Wear safety glasses when vapour or fume may be
generated during processing or working for a long time.
Respiratory Protection: No special requirements under normal conditions. Use an approved respirator if exposure limits are
exceeded or if irritation or other symptoms occur.
Protection of Body: Recommend wearing general working clothing.
General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.
Wash hands before breaks and at the end of work.
9. Physical and chemical properties
General Information
Form
Solid, containing liquid
Color
Light nature wooden grain
Odor
No data available
Odor threshold
No data available
pH
5-8 (Liquid)
Melting point/freezing point
No data available
Initial boiling point and boiling range
No data available
Flash point
No data available
Evaporation rate
No data available
Flammability (solid, gas, etc.)
Non-flammable
Upper/lower flammability or explosive limits
No data available
Vapor pressure
No data available
Vapor density
No data available
Density
0.8-0.9 (Liquid)
Solubility (ies)
No data available
Partition coefficient: n-octanol/Water
No data available