Specifications

Owners manual
When you receive your loudspeakers, you should make sure that the shipping box is in
its original state. If that is not the case, please contact your dealer.
Unpack the loudspeaker carefully, as there are several parts that can be damaged. We
suggest that you keep your box and inserts. You may need them for transporting your
loudspeakers.
Make sure that each of your shipping boxes contains the following:
2 pcs Coltrane Supreme main loudspeaker
2 pcs Coltrane Supreme bass loudspeaker
4 pcs stainless steel stands with Black Diamond
Racing cones and pucks
16 pcs M8 bolts
1 pcs Coltrane Supreme amplifier/crossover
4 pcs Coltrane Supreme jumpers
1 pcs Owner’s Manual
We recommend that at least two persons help each other in unpacking the
loudspeakers.
• Open the shipping boxes close to the intended listening place.
• Make sure that the box is placed upon a soft surface.
• Open the box and remove the plastic foam material.
• Lift the speaker out from the box. One person lifting at each end and place it upside
down on a soft surface.
• Remove the cloth material from the loudspeaker.
• Assemble the stainless steel stands with the cones.
• Raise the speaker upright and place it on the Black Diamond Racing pucks.
Your Coltrane Supreme loudspeaker system need quite a bit of playing time in order to
reach their maximum performance. The use of the burn-in CD enclosed with the
Coltrane Supreme loudspeakers is recommended to speed up this process. Follow
these steps:
1. Connect interconnects from your source to the Supreme amplifier/crossover.
2. Connect the interconnects from the Supreme amplifier/crossover to your main amplifier.
3. Connect the bass cables from the Supreme amplifier/crossover to the bass loudspeakers.
4. Connect the loudspeaker cables from your main amplifier to the main loudspeakers.
5. Connect the power cord to the Supreme amplifier/Crossover.
6. Switch the system on and wait at least 5 minutes before you do anything.
7. Put the CD in your CD player.
8. Choose track 1 and set it on repeat.
9. Set the volume to a moderate level.
The CD should be played for a minimum of 24 hours before attempting to adjust the
loudspeaker placement. For more in-depth information about this process, please refer
to the section about burn-in.
Unpacking
Quick Setup
4