COLTRANE SUPREME Owners manual
Owners manual Table of contents Introduction Marten Philosophy Unpacking Quick Setup Connecting the loudspeakers 2 3 3 4 4 5 Choice of cable Bi-wiring/Bi-amping Connections Burn-in Room Acoustics Positioning 5 6 6 Loudspeaker placement Distance to back and side walls Focusing the loudspeakers Toe-in Enclosed CD Care of Loudspeakers Service Warranty Serial Number Technical Specifications 7 7 7 8 8 9
Owners manual Introduction Congratulations! You are now the proud owner of a pair of Marten loudspeakers. At the forefront of current designs, the Coltrane Supreme will reveal the full emotional range of music with vivid dynamics and detail. Properly installed, your Coltrane Supreme loudspeakers will give you many years of listening pleasure.To realize the highest sound quality from your loudspeakers, some important topics will be addressed in the following pages.
Owners manual Unpacking When you receive your loudspeakers, you should make sure that the shipping box is in its original state. If that is not the case, please contact your dealer. Unpack the loudspeaker carefully, as there are several parts that can be damaged. We suggest that you keep your box and inserts. You may need them for transporting your loudspeakers.
Owners manual Connecting the Loudspeakers To make the most of your Coltrane Supreme loudspeaker system, please consider the following suggestions: Choice of cable The impact loudspeaker cables can have on the sound is dramatic. Be sure to use the same brand, type, and length of cable on each channel. Mixing different types and/or lengths of cable can upset the precise timing and balance of your loudspeaker. We recommend the use of Jorma Design Prime cable to achieve maximum result.
Owners manual Room Acoustics A good listening room has just the right amount of reflection and absorption. The performance of any loudspeaker depends upon the speaker's location in the room and the acoustical conditions in that part of the room. Furnishings, size, and proportions all effect tonal balance, imaging, and bass characteristics. To test the sonic balance of your room, stand in the location where the speakers will be installed and clap your hands two or three times.
Owners manual Enclosed CD 1. Burn in Sweep 2. Focusing the Loudspeakers Track 2 taken from the CD – “Feathers” with Jeanette Lindström & Steve Dobrogosz © 200, PROPHONE RECORDS AB For more information of the CD “Feathers” please visit www.prophonerecords.se Care of loudspeakers Marten loudspeakers require no special treatment apart from the kind of handling you would apply to any high-tech product in your home.
Owners manual Warranty Marten provides a transferable, limited manufacturer’s warranty. This warranty covers faults or defects in material or production only. Damage caused by abuse or misuse, or by the use of defective electronics, is not covered by warranty. Please contact your local Marten dealer for more information about this warranty. Warranty Exclusion Transportation damage, visible or hidden. Damage should be reported immediately to the transport company.
Owners manual Technical Specifications: Coltrane Supreme main loudspeakers Frequency range: 90-100000 Hz +-1.5 dB Power rating: 300 W continuous, 1500 W peak Sensitivity: 93 dB/2.83 V Impedance: 6 ohm (4.
Owners manual Technical Specifications: Coltrane Supreme bass loudspeakers Frequency range: 17-100 Hz -3 dB Power rating: 800 W continuous, 4000 W peak Impedance: 4 ohm (4.0 ohms minimum) Type: Ported system, 22 Hz Drive units: Six 9” ceramic-woofers Terminals: Custom made Cabinet: 25 mm:s carbon fibre laminate sides, 60 mm wood front, back, top and bottom Stands: Polished steel with Black Diamond Racing cones and pucks Dimensions (WxHxD): 360 x 1760 x 500 mm (14.2” x 69.3” x 19.
Owners manual Technical Specifications: Coltrane Supreme amplifier/crossover Power: 2000 Watt / channel in 4 Ohms Output principle: Class AB bipolar Crossover: Lowpass;: 4:th order (24 dB/octave) digital. High pass: 4:th order (24 dB/octave) analogue Crossover frequency: 100 Hz Power supply: Switch mode 11 KVA Terminals: Custom made Dimensions (WxHxD): 480x217x650 mm, (18.9”x8.5”x25.
Owners manual Picture 1 min 700 mm min 400 mm 150-250 mm min 2300 mm min 2600 mm
Owners manual Picture 2 LEVEL PHASE
