User Manual

MT-KP1531B
5
 This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
 Be cautious when using blade.
 Every time after use, make sure the appliance is turned off, the blades stopped completely. Only then open the lid.
 Do not overload the appliance. The appliance is designed for processing relatively small quantities of food and maximum quantities given in the table should not be exceeded.
 Never blend hot liquids!
 Maximum time of continuous operation - no more than 1 minute with an interval for at least 5 minutes.
 Do not use the device if the cord is damaged.
 Do not use the device if the cup is empty.
 Do not leave the device unattended.
 Always disconnect the device from power supply if you do niot use it and before cleaning.
BEFORE THE FIRST USE
 Please unpack your appliance and remove all packing materials
 Clean the motor unit with dump cloth, wash blades and jar with soapy water, rinse and dry.
 Do not immerse motor unit into water.
INSTRUCTION FOR USE
 Place the device on a flat steady surface.
 Load the ingredients into the jar. Cut big pieces into smaller ones with size of 2-3 cm.
 Connect the blade unit to the jar.
 Install the jar with blade unit onto motor unit by turning it clockwise.
Caution: blender cannot be used for crushing ice and mixing hot ingredients! This can cause damage of the device.
 Insert the plug into power supply. Select the appropriate blending speed.
NOTE: The switch does not permanently engage in the 'P' setting. You have to hold the switch in the 'P' setting or turn it repeatedly into the 'P' setting.
 Before opening lid wait until blade fully stops. Before removing bottle from the motor unit unplug the device from the power source.
 Disconnect bottle from the blade unit.
CAUTION: For most kinds of food, it is advisable to switch on the device a few times in succession and then to continue operating until the required degree of fineness has been achieved.
Do not overload the appliance by putting in too much food and do not operate continuously for more than one minute.
CLEANING AND MAINTENANCE
 Unplug the appliance from the power supply.
 Wipe the motor outside with a damp cloth.
 Wash jar, blades and lid right after use with warm soapy water and wipe it with dry cloth.
 Do not use aggressive and abrasive agents for cleaning