User's Manual

- 3 -
INTRODUCTION
SPECIFICATIONS
Sensor Area Image Sensor
Resolution 5mil/ 0.1mm (1D), 6.67mil/ 0.2mm (2D)
Indicator LED, Buzzer
PCS 40%
Housing Plastic(PC+ABS)
Profile
BT HID, BT SPP, USB HID, USB VCP, Memory
Battery Life 4500 scans (1 scan/ 5 sec)
Charge Time 2.5 hours (fully charged)
Radio Bluetooth 5.0 dual mode (Class2)
Coverage 10M/33ft. (line of sight)
Symbologies All major 1D & 2D barcodes
- 4 -
BEEPER INDICATION
LED INDICATION
Off
Flashing Blue
One Green Flash
Flashing Red
Solid Red
Standby or Power off
Disconnected or Discoverable
Good Read
Low power
Charging
Single beep Good read
Single short beep The scanner reads a Code39 of
ASCII in configuration procedure
Two beeps i. Wireless connection
ii. The scanner successfully reads
a configuration barcode
Four beeps (Hi-Lo-Hi-Lo) Out of range/Poor connection
Five beeps Low power
Three beeps Wireless disconnection
Three short beeps i. The scanner reads a barcode
while disconnected.
ii. The scanner reads an unexpected
barcode during configuration
procedure. (scan [ABORT] to abort
and start over)
iii. Memory Full
LED Indicator
Micro USB port
(with Protective Cover)
Touch-Activated
Trigger Button
Function Button/
Power Button
Exit Window
Restart Button
(insert pin into the hole)
Velcro Strap