M E T S Y S DYNAMIC 7200 Head, 72115 & 72410 Combos
ENGLISH From Jim Marshall I would like to thank you personally for selecting one of our Dynamic Bass Systems. My company has always been totally committed to the design and manufacture of the worlds finest amplification. We are well aware that catering for the constantly changing demands of musicians requires heavy investment into the research and development of new product ranges capable of meeting those demands. The new Marshall Dynamic Bass System comes as a direct result of that investment.
ENGLISH WARNING! PLEASE READ THE FOLLOWING LIST CAREFULLY. A. ALWAYS Ensure that a good quality mains plug conforming to the latest BSI standards is fitted-(UK only). B. ALWAYS wire the plug in accordance with the colour code attached to the mains lead (UK only). C. DO NOT attempt to remove the amplifier chassis. There are no user serviceable parts inside. D. ALWAYS have this equipment serviced or repaired by competent, qualified personnel. E.
Models 7200, 72115 & 72410 Front Panel Functions. 7. Bright Switch 1. Hi-sensitivity Input 8. High Primary EQ Control Push switch to add brightness and attack to the top end of the primary EQ. Input for the connection of bass guitars with lower output levels. Rotary control that gives + or - 15dB cut or boost of the primary EQ upper frequencies. 2. Lo-sensitivity Input 9. Graphic Equaliser Input for the connection of bass guitars with higher output levels.
ENGLISH 13. Compression On/Off Push Switch 19.Tuner Output Jack Push switch which activates the compression circuit. Instrument level buffered output for direct connection to an electronic tuner. 14. Volume Control 20. Effects Send Jack Rotary control to set the overall output level of the amplifier. Jack socket to connect to the input of an external effects processor. 15. D.I. Pre or Post EQ Selection Switch 21.
Front Panel. 3. 2. DYNAMIC INPUTS PRE-AMP BLEND GAIN 10. 7. 5. EQUALIZATION LO +15dB +15dB Y S T E 16. COMPRESSION VOLUME POWER HI 0 S 14. 12. 0 D.I. M . HI .S . . V PEAK LO . DEEP -15 . +15 . BRIGHT -15 . . +15 DEPTH -15dB -15dB S-SOLID STATE V-VALVE . GRAPHIC 80 160 320 640 1250 2500 PRE POST 5000 DYNAMIC BASS SYSTEM 4. 6. 8. 9. 11. 15. 13. Rear Panel. 17. MAINS INPUT 230v -50 Hz 19. 20. 21. 22.
