MONITOR II A.N.C.
LEGAL AND TRADEMARK NOTICE DISCLAIMER • Design of device and packaging are intellectual properties of Zound Industries International AB. © All Rights Reserved. Zound Industries International AB is hereinafter referred to as “Zound Industries”. • MARSHALL, Marshall Amps, their respective logos, “Marshall” and “Marshall” trade dress are trademarks and intellectual property of Marshall Amplification Plc and may not be used without permission. Permission granted to Zound Industries.
INDEX 002. LEGAL AND TRADEMARK NOTICE 006. GETTING STARTED 006. DEVICE LAYOUT 007. THE CONTROL KNOB 008. THE LED INDICATOR 008. CHARGING YOUR HEADPHONES 009. THE ANC MODE BUTTON 010. THE M-BUTTON 010. THE 3.5 MM INPUT 011.
GETTING STARTED 001. Push and hold the control knob until the LED indicator blinks blue. 002. Select MONITOR II from your audio device’s Bluetooth® list. 003. Download the Marshall Bluetooth app and follow the in-app instructions to setup the M-button, adjust ANC, customise the EQ settings and more. Get the Marshall Bluetooth app on Google Play or the App Store. It is recommended to charge the battery before using your headphones for the first time. DEVICE LAYOUT 001. Customisable M-button 002.
THE CONTROL KNOB THE LED INDICATOR Use the control knob on the right ear cap to control audio, start Bluetooth® pairing mode and turn the headphones on or off.
THE ANC MODE BUTTON THE M-BUTTON Monitor II A.N.C. utilise Active Noise Cancelling (ANC) technology that continuously pinpoints and measures ambient noise to control how much of the outside world you hear. The M-button can be set to switch between three different equaliser presets or alternatively, your phones voice assistant or the Google Assistant. There are two ANC modes. • Active noise cancelling - Block out the noise and focus on what is playing.
TROUBLESHOOTING PROBLEM CAUSE CANNOT PAIR WITH A BLUETOOTH DEVICE The headphones are not in pairing Make sure the headphones are mode. turned off. Push the control knob for 4 seconds, until the LED indicator blinks blue. Select MONITOR II from your Bluetooth device list. ANC IS NOT WORKING ACTION CAUSE ACTION THERE ARE TWO INSTANCES OF MONITOR II IN THE BLUETOOTH DEVICE LIST Monitor II A.N.C. uses two Bluetooth connections.
MARSHALLHEADPHONES.
