MG15HCFX Front Panel CLEAN / CRUNCH BASS MIDDLE TREBLE VOLUME REVERB FX 3 4 0 5 10 6 0 10 7 LAY 0 8 I wish you every success with your new Marshall MG15HCFX. Welcome to the family... Yours Sincerely, 9 OFF OCTAVE 0 10 11 12 13 10 14 15 16 11. FX Control Selects and adjusts one of five digital effects - Chorus, Phaser, Flanger, Delay and Octave. 12. Store Switch Stores the current amp settings into the current channel or to recall with the optional footcontroller.
MG15HCFX Features Channel Selection The amplifier has 4 channels - Clean, Crunch, OD-1 & OD-2. Pressing Store (12) will store the current settings into the selected channel. These can then be recalled when using the unit in Preset mode. When channel settings have been stored the current channel light (3 or 5) will stop flashing indicating the preset has been saved. Pressing the Clean/Crunch switch (3) selects between the Clean (Green Light) and Crunch (Red Light) channels.
Footcontroller (optional - PEDL-90008) 1. Footcontroller Each footswitch can be assigned a different stored function. 2. LED Status Panel This always reflects the current status of the amplifier or tuner details: By simultaneously pushing the Tap (10) and Store (12) switches on the front panel or by assigning the Tuner to the footswitch. Note: On factory reset / first switch on, the Tuner is already assigned to Footswitch number 4.
Marshall Factory Presets Clean: Pure guitar tone with a touch of chorus + reverb green Crunch: Classic rock tone paired with spring reverb. red OD1: Pure and brutal, with a hint of studio reverb to fatten. green OD2: A soaring arena lead with studio reverb and delay red Marshall Amplification plc Denbigh Road, Bletchley, Milton Keynes, MK1 1DQ, England. Tel : +44 (0)1908 375411 Fax : +44 (0)1908 376118 www.marshallamps.
