MG15CFX CLEAN / CRUNCH BASS MIDDLE TREBLE VOLUME REVERB FX 4 10 5 0 6 7 TREBLE VOLUME Yours Sincerely, 3 10 4 10 0 5 6 0 10 7 0 8 10 9 LAY 11 12 13 14 R SE 15 16 17 MG30CFX FLA NG DE OFF OCTAVE 0 FOOTCONTROLLER POWER 15 17 10 10 11 12 13 14 1. Input Jack Socket Jack input for your guitar. Use a good quality guitar cable (i.e. one that’s screened/shielded) to help prevent noise, interference and unwanted feedback. 11.
MG15CFX & MG30CFX Overview Channel Selection The amplifier has 4 channels - Clean, Crunch, OD-1 & OD-2. Pressing Store (12) will store the current settings into the selected channel. These can then be recalled when using the unit in Preset mode. When channel settings have been stored the current channel light (3 or 5) will stop flashing indicating the preset has been saved. Pressing the Clean/Crunch switch (3) selects between the Clean (Green Light) and Crunch (Red Light) channels.
MG50CFX / MG101CFX / MG102CFX / MG100HCFX OD-1 / OD-2 VOLUME FX E VIB STUDIO O HI CH -F I R 0 10 0 10 0 10 0 10 OFF OCTAVE 1 10 POWER 2 3 4 5 6 7 8 9 10 Rear panel shows MG50CFX combo - MG100CFX combo has the same features MG100HCFX head is identical except features two loudspeaker sockets 11 12 13 14 15 16 17 18 19 50W 4 1x12" 16.
MG50CFX & MG101CFX / MG102CFX / MG100HCFX Overview Channel Selection The amplifier has 4 channels - Clean, Crunch, OD1 & OD2. Pressing Store (19) will store the current settings into the selected channel. These can then be recalled when using the unit in Preset mode. When channel settings have been stored the current channel light (3 or 5) will stop flashing indicating the preset has been saved. Pressing the Clean/Crunch switch (3) selects between the Clean (Green Light) and Crunch (Red Light) channels.
Footcontroller (optional - PEDL-90008) 1. Footcontroller Each footswitch can be assigned a different stored function. MG50CFX & MG100CFX By simultaneously pushing the Damping (17) and Store (19) switches on the front panel or by assigning the Tuner to the footswitch. Note: On factory reset / first switch on, the Tuner is already assigned to Footswitch number 4. When either a Channel preset or Footswitch preset has been altered the Digital Display (3) will begin to flash.
Marshall Factory Presets Clean: Pure guitar with a touch of chorus and studio reverb - with a subtle delay on the MG50CFX & MG100CFX. On On Off On Off Off On Off On On On Crunch: Classic rock tone paired with spring reverb. On the MG50CFX & MG100CFX turn the FX on to introduce a slap back delay. OD1: Pure and brutal, with a hint of studio reverb to fatten. On the MG50CFX & MG100CFX turn the FX on to kick in the Octave effect. OD2: A soaring arena lead with studio reverb and delay.
