User manual

ManualsBrandsMarshall Electronics ManualsSecurity CamerasVS-WM202-HDSI

Marshall Electronics

VS-WM202-HDSDI

Heavy Duty Exterior PTZ Camera

20x Zoom and IR LED

User Manual

Summary of content (48 pages)

PAGE 1
Marshall Electronics VS-WM202-HDSDI Heavy Duty Exterior PTZ Camera 20x Zoom and IR LED User Manual
PAGE 2
Copyright © May 2012, Marshall Electronics, Inc. All Rights Reserved. This document may not be copied. Trademarks Other trademarks used in this document are registered trademarks or manufacturer or vendor trademarks associated with the products. Disclaimer Product options and specifications can be changed without notice. The information in this manual is furnished for informational use only and should not be construed as a commitment by Marshall Electronics, Inc. Marshall Electronics, Inc.
PAGE 3
TABLE OF CONTENTS __________________________________________________ 1. INFORMATION FOR USER...................................................................................................................................5 1. 1 WARNING. ...............................................................................................................................................5 1. 2 EXPLANATION OF GRAPHICAL SYMBOLS . ........................................................................................
PAGE 4
5. 4. 1 CAMERA MENU (EH-6300). .......................................................................................................27 5. 4. 1 CAMERA MENU (EH-6300). .......................................................................................................35 5. 5 Clear Settings . .........................................................................................................................................41 5. 6 Special Settings . ....................................................
PAGE 5
___________________________________________________________________________ 1. INFORMATION FOR USER 1. 1 WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECTS THROUGH THE VENTILATION GRILLS OR OTHER OPENINGS ON THE EQUIPMENT. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.
PAGE 6
___________________________________________________________________________ 2. PRECAUTIONS • Do not install the camera in extreme temperature conditions. Do use the camera under conditions where temperatures are within -20°C to 60°C (in continuous operation). Under high temperatures, ensure proper ventilation. • Do not install or use the camera in an environment where the humidity is high. It can cause the image quality to be poor. • Do not install the camera under unstable lighting conditions.
PAGE 7
___________________________________________________________________________ 3. FEATURES Outdoor Heavy-Duty PTZ Camera Heavy-duty aluminum die-cast body makes the VS-WM-202-HDSDI ideal for traffic control, harbor and airport surveillance, oil fields & refineries, the military & police, sport stadiums, town & city centers, bus & rail stations and other high security outdoor installations.
PAGE 8
___________________________________________________________________________ WDR (Wide Dynamic Range) The Camera delivers clear, high quality pictures even in backlight, by increasing exposure in dark areas while decreasing it in bright areas a corrected image with clear details results. Variable Speed Pan/Tilt Control In manual mode, sophisticated operating is possible at zoom in state by speed correcting function.
PAGE 9
___________________________________________________________________________ 4. 2 DIP Switch Settings Before starting up the camera, set the protocol, camera address and details with dip-switches referring to the following. Each camera must have a unique address (ID). Identical ID’s on the same line may damage the control circuit caused by an electric short. VS-WM202-HDSDI – V 1.3.
PAGE 10
___________________________________________________________________________ 4. 3 Cable Connection 4. 3. 1 Basic Diagram of Cable Connection 4. 3. 2 Video Output Connection 2 Connect the video out (BNC) connector to the monitor or HD SDI video input of DVR. 4. 3. 3 RS-485 / RS-422 Communication Connection It can be remotely controlled by an external device or control system, such as a control keyboard or DVR, using RS-485 half-duplex, RS-422 duplex or simplex serial communication signals.
PAGE 11
___________________________________________________________________________ 4. 4 Installation - The following steps of installation and connection work should only be done by qualified service personnel or system installers and should conform to all local codes. - Be sure to switch the camera off before installation is completed. - Do not install the camera near the air outlet of an air conditioner. - Before installation, set camera system with Dip-switches on the 7~8 pages. VS-WM202-HDSDI – V 1.3.
PAGE 12
___________________________________________________________________________ 4. 5 Basic Configuration VS-WM202-HDSDI – V 1.3.
PAGE 13
___________________________________________________________________________ 5. MAIN SETUP MENU 5. 1 Initialize When the device is powered on, you can check the address, version, protocol and video setting values. 5. 2 Motion Setting 5. 2. 1 Preset VS-WM202-HDSDI – V 1.3.
PAGE 14
___________________________________________________________________________ VS-WM202-HDSDI – V 1.3.
PAGE 15
___________________________________________________________________________ VS-WM202-HDSDI – V 1.3.
PAGE 16
___________________________________________________________________________ 5. 2. 2 Tour VS-WM202-HDSDI – V 1.3.
PAGE 17
___________________________________________________________________________ 5. 2. 3 Scan VS-WM202-HDSDI – V 1.3.
PAGE 18
___________________________________________________________________________ VS-WM202-HDSDI – V 1.3.
PAGE 19
___________________________________________________________________________ 5. 2. 4 Pattern VS-WM202-HDSDI – V 1.3.
PAGE 20
___________________________________________________________________________ VS-WM202-HDSDI – V 1.3.
PAGE 21
___________________________________________________________________________ 5. 2. 5 Area VS-WM202-HDSDI – V 1.3.
PAGE 22
___________________________________________________________________________ 5. 2. 6 Alarm VS-WM202-HDSDI – V 1.3.
PAGE 23
___________________________________________________________________________ 5. 2. 7 Privacy Zone Masking VS-WM202-HDSDI – V 1.3.
PAGE 24
___________________________________________________________________________ 5. 3 Dome Setting VS-WM202-HDSDI – V 1.3.
PAGE 25
___________________________________________________________________________ 5. 3. 1 Set the Dome Camera Title 5. 3. 2 Set the Power Up Action 5. 3. 2 Park Action VS-WM202-HDSDI – V 1.3.
PAGE 26
___________________________________________________________________________ 5. 3. 4 Display ON/OFF Set 5. 3. 5 Speed by Zoom ON/OFF Set VS-WM202-HDSDI – V 1.3.
PAGE 27
___________________________________________________________________________ 5. 3. 6 Auto Flip ON/OFF Set 5. 3. 7 Factory Set 5. 4 Camera Settings 5. 4. 1 CAMERA MENU (EH-6300) VS-WM202-HDSDI – V 1.3.
PAGE 28
___________________________________________________________________________ VS-WM202-HDSDI – V 1.3.
PAGE 29
___________________________________________________________________________ VS-WM202-HDSDI – V 1.3.
PAGE 30
___________________________________________________________________________ VS-WM202-HDSDI – V 1.3.
PAGE 31
___________________________________________________________________________ VS-WM202-HDSDI – V 1.3.
PAGE 32
___________________________________________________________________________ VS-WM202-HDSDI – V 1.3.
PAGE 33
___________________________________________________________________________ VS-WM202-HDSDI – V 1.3.
PAGE 34
___________________________________________________________________________ VS-WM202-HDSDI – V 1.3.
PAGE 35
___________________________________________________________________________ 5. 4. 1 CAMERA MENU (EH-6300) VS-WM202-HDSDI – V 1.3.
PAGE 36
___________________________________________________________________________ VS-WM202-HDSDI – V 1.3.
PAGE 37
___________________________________________________________________________ VS-WM202-HDSDI – V 1.3.
PAGE 38
___________________________________________________________________________ VS-WM202-HDSDI – V 1.3.
PAGE 39
___________________________________________________________________________ VS-WM202-HDSDI – V 1.3.
PAGE 40
___________________________________________________________________________ VS-WM202-HDSDI – V 1.3.
PAGE 41
___________________________________________________________________________ 5. 5 Clear Settings 5. 6 Special Settings VS-WM202-HDSDI – V 1.3.
PAGE 42
___________________________________________________________________________ VS-WM202-HDSDI – V 1.3.
PAGE 43
___________________________________________________________________________ 5. 7 PTZ Reset VS-WM202-HDSDI – V 1.3.
PAGE 44
___________________________________________________________________________ 5.
PAGE 45
___________________________________________________________________________ 6. 1. 4 ELECTRICAL 6. 1. 5 CERTIFICATES CE EMC, FCC CLASS A, RoHS, e-Mark 6. 2 Camera Specifications 6. 2. 1 Zoom Camera EH-6300 VS-WM202-HDSDI – V 1.3.
PAGE 46
___________________________________________________________________________ 6. 2. 2 LED Specification VS-WM202-HDSDI – V 1.3.
PAGE 47
___________________________________________________________________________ 7. DIMENSIONS (mm) VS-WM202-HDSDI – V 1.3.
PAGE 48
___________________________________________________________________________ Marshall Electronics, Inc. 1910 East Maple Ave. El Segundo, CA 90245 Tel: (800) 800-6608 / (310) 333-0606 • Fax (310) 333-0688 www.LCDRacks.com • sales@lcdracks.com VS-WM202-HDSDI – V 1.3.