User manual

VS-570-HDSDI User Manual
2.0 Megapixel Speed Dome Manual
47/54
Swing
 By using Swing function, you can make camera to move between 2 Preset positions repeatedly. When
swing function runs, camera moves from the preset assigned as the 1st point to the preset assigned as
the 2nd point in CW(Clockwise) direction. Then camera moves from the preset assigned as the 2nd
point to the preset assigned as the 1st point in CCW(Counterclockwise) direction.
In case that the preset assigned as the 1st point is same as the preset assigned as the 2nd point,
camera turns on its axis by 360 in CW(Clockwise) direction and then it turns on its axis by 360 in
CCW(Counterclockwise) direction
.
1. Check Enable box
2. Select the Preset for 1st Position and 2nd Position
3. Enter the Speed (0~255)
4. Press Save Swing button to save the Swing
Group
 This function allows the camera to memorize a combination of Presets, Patterns and/or Swings as a
Group which can be sequentely run repetitively. A Maximum of 8 sets of Group are available to
program. Each group can have maximum of 20 actions which are the combination of Presets, Patterns
and Swings. Preset speed and the repeat number of Pattern & Swing can be set using the
Option entry. Dwell time between actions can be set up as well.
1. Select one of the Group entries.
2. Press Modify Group button. The following window will appear.
3. Set the Action (Preset or Swing or Pattern), Dwell Time and Option and check the Enable boxes.
4. Press Apply button. The Group can then be used on the Live View Page.