User manual

VS-570-HDSDI User Manual
2.0 Megapixel Speed Dome Manual
46/54
PTZ
 Control PTZ using the PTZ controller
Preset
 A Maximum 128 positions can be stored as Preset positions.
1. Move the position to be set.
2. Select one of the entries of Preset from the list.
3. Press Set button.
4. Enter the preset name to be used and press Save Label button.
5. Press Go to button to move to the present position.
Pattern
 Pattern Function is that a camera memorizes the path (mostly curve path) by joystick of controller for
assigned time and revives the path exactly as it memorized. 4 Patterns are available and Maximum 760
communication commands can be stored in a pattern.
1. Select one of the entries of Pattern from the list.
2. Press Set Pattern Start button. Create the Pattern by using the PTZ controls. Every move will be
saved until pressing the Set Pattern Stop button.
3. Press Set Pattern Stop button to save the pattern.
4. Press Run Pattern button to playback the selected pattern.
Note that when the system memorizes patterns, the commands are stored in the internal memory not
the in the Pan/Tilt/Zoom positions. Hence there might be small differences between the original path
and the replayed path by path patterns. Note that it is not a problem in position precision.