User manual

VS-570-HDSDI User Manual
2.0 Megapixel Speed Dome Manual
41/54
Serial Port Configuration
 Serial Port Information
RS-485 in VS-570-HDSDI support one RS-485 serial port.
The camera‟s serial port information is displayed automatically once the camera reboots after the DIP
switch setup of the camera.
 PTZ Type & ID: PTZ Type & ID are displayed automatically once the camera reboots after DIP switch
setup. The default PTZ Type and ID is Pelco-D and 2400bps.
Sensor Type
 There are two sensor input ports on VS-570-HDSDI. The sensor ports can be configured as follows:
Function
Operation
OFF
Not used
NO (Normally
Open)
The port is normally open and activated when
closed.
NC (Normally
Closed)
The port is normally closed and activated
when opened.
The function of the sensor port is set based on the type of the sensor connected.
Sensor Schedule
 Choose Sensor OFF or Sensor ON. Click or drag the schedule cells below to set the Sensor
Schedule according to the day of the week and hour of the day.