User manual

VS-570-HDSDI User Manual
2.0 Megapixel Speed Dome Manual
37/54
 HTTP Port
Enter the HTTP port used for web-based connection.
 RTSP Port
Enter the RTSP port used for RTSP-based connection. The default RTSP port is 554.
RTSP (Real Time Streaming Protocol) is a standard for connected client(s) to control streaming data
over the World Wide Web.
Authentication
 RTSP Authentication
If the RTSP Authentication set to ON, the user must enter correct User ID and Password when any RTSP
client is connected.
 HTTP API Authentication
When HTTP API authentication set to ON, HTTP Authentication is asked for all clients which use
HTTP API .
RTP Session
 RTP (Real-Time Transport Protocol) is an Internet protocol used for transmitting single real-time
multimedia data such as audio and video to a select group of connected clients. Normally RTSP uses
RTP to format packets of multimedia content. The RTP Session menu is used when only streaming the RTP
without RTSP connection. The RTP stream will be transmitted to the destination set. The SDP (Session
Description Protocol) file can be found in the server, and a client can retrieve it using http connection.
Related settings are as follows:
- Destination IP: Set the IP Address for your destination system which will receive RTP stream.
- Destination Port: Set the Port for your destination system which will receive RTP stream.
- User Name: Enter the User name that will be used as session name in the SDP file.
- File Name: Enter the file name that will be used as the name of the SDP file. It can then be
accessed through http://ServerAddress/filename.