User manual

VS-570-HDSDI User Manual
2.0 Megapixel Speed Dome Manual
27/54
Time
 Start Time
This is the date and time when the camera was last booted.
 Current Time
This is the current date & time.
Enter a new date and time and press the Set Current Time button to update.
 Time Format
This allows you to change the time format. Selectable time formats are as follows:
- YYYY/MM/DD hh:mm:ss (Ex. 2010- 4-11 18:18:42)
- DD/MM/YYYY hh:mm:ss (Ex.11- 4-2010 18:18:42)
- MM/DD/YYYY hh:mm:ss (Ex. 4-11-2010 18:18:42)
 Time Zone
This allows you to select the time zone of where the camera is installed.
Depending on the time zone, Daylight Saving Time will work automatically.
.
 Automatically synchronize with NTP server
Checking this box will Synchronize the camera time with an NTP server using NTP (network time protocol).
Enter the NTP server name of the NTP server to be used.
Reboot
 Pressing this button will Reboot the camera.
Do not press the Reboot button unless required.
A time zone is a region of the earth that has uniform standard time, usually referred to as the local
time. By convention, time zones compute their local time as an offset from UTC (Coordinated
Universal Time). In casual use, GMT (Greenwich Mean Time) can be considered equivalent to UTC.
Local time is UTC plus the current time zone offset for the considered location.
The Network Time Protocol (NTP) is a protocol for synchronizing the clocks of computer systems
over packet-switched, variable-latency data networks. It is designed particularly to resist the effects
of variable latency by using a jitter buffer.