User manual

VS-570-HDSDI User Manual
2.0 Megapixel Speed Dome Manual
23/54
Video Monitoring with Decoder System
Once the VS-570-HDSDI‟s IP address is set in the remote IP address section of the decoder, the decoder
system will connect to VS-570-HDSDI and start receiving the video images. Normally, a monitor connected
to the decoder will display video images.
Initialization of IP address
If a system IP address is lost, the system can be reset to the system default IP address using the reset
button in the rear of the system.
1. While the system is in operation, press and hold the reset button for more than 5 seconds.
2. The system will automatically reboot.
3. Once the system reboots, the IP address will be set to the system default as below:
 IP mode
Fixed IP
 IP address
192.168.10.100
 Subnet mask
255.255.255.0
 Gateway
192.168.10.1
 Base port
2222
 HTTP port
80