User manual

VS-570-HDSDI User Manual
2.0 Megapixel Speed Dome Manual
15/54
Installation using the Wall Mount Bracket
① Make a hole whose diameter is 30~40mm on
the mounting surface to pass the wire(s) and
cable(s) through the mounting surface.
Prepare the wall mount bracket by Pulling the
wire(s) and cable(s) for the system as below. Attach
the wall mount bracket to the mounting surface.
(Hex Lag #14×50)
②
Hook up the “Drop Prevention Spring” on main body to
prevent the camera from unexpected drops. Pull the
wire(s) and cable(s) for the system as below.
③
Line up the index marks and assemble the main
body to the mounting ring and turn it. Attach the
main body to the mounting adaptor with the supplied
(Torx screw M4X18). Please make certain the screws
are securely tightened to maintain a waterproof seal. .
④ Screw the dome cover to the main body and
remove the protection vinyl from the dome.
Notice
 Before starting the installation, make sure that the Camera ID and Protocol are set up properly.