User manual

VS-570-HDSDI User Manual
2.0 Megapixel Speed Dome Manual
13/54
Communication Protocol Setup
1 2 3 4
ON
ON
 Select the appropriate Protocol with DIP switch combination.
Switch State
Protocol/Baud rate
S0
(Pin 1)
S1
(Pin 2)
S2
(Pin 3)
OFF
OFF
OFF
PELCO-D, 2400 bps
ON
OFF
OFF
PELCO-D, 9600 bps
OFF
ON
OFF
PELCO-P, 4800 bps
ON
ON
OFF
PELCO-P, 9600 bps
Otherwise
Reserved
 If you want to control using a DVR or P/T controller, their protocol must
be identical to the camera otherwise, you can not control the camera.
 Turn off the camera before adjusting the DIP switches. If you change the
camera protocol by changing the DIP switches, the change will be effective
after you reboot the camera.
 Factory default of protocol is “Pelco-D, 2400 bps”.