User Manual

4- Remote Configuration
___________________________________________________________________________
User Manual VS-102 HDSD/HDI - V2.3 Page 42 of 64 5/7/12
Message Description
Email Sent
Successfully
Test email has been sent successfully. Reception
can be checked with client.
Failed Connection
to SMTP Server
Connection to the SMTP server failed. It is
necessary to check if the server is reachable and
server address and port are correct.
Authentication
Failed
The server is reachable but authentication failed.
ID and/or password need to be checked.
SMTP Server
Rejected Mail
The server is reachable, but email failed due to a
reason other than authentication. This error
happens often when the server authenticates
according to its own rule. For Example: The IP
address of a specific range or specific suffix is
allowed.
FTP Upload
Specify the information to upload when FTP is selected as an Event Action.
 Server Address: Enter the FTP server address that will receive video files.
 Port: Specify a port for FTP operation. Port 21 is the default port in FTP operation.
If a different port is configured in the FTP server, this port needs to be changed
accordingly.
 ID & Password: Enter ID and Password to access the FTP server.
 FTP File Name: The files uploaded to the FTP server can be named by the user. If
a fixed name is specified, the file is overwritten. File name maximum length is 60
characters. If the name is left blank, file name is determined according to the internal
rule implemented in the firmware. The following macros are supported to form variable
parts of file names. The strings are case-sensitive.
%YYYY: year
%MM: month
%DD: day
%hh: hour
%mm: minute
%ss: second
%EVENT: event type (Sensor1, Motion, ...)
%ADDR: server address (Domain Name when DDNS is used; otherwise IP Address)
“.avi” or “.jpg” will be automatically added at the end of filenames depending on the
type of video file.