User Manual

4- Remote Configuration
___________________________________________________________________________
User Manual VS-102 HDSD/HDI - V2.3 Page 31 of 64 5/7/12
Ipv6
 Ipv6 Address
Enter the designated Ipv6 Address.
 Ipv6 Subnet Prefix Length
Enter the bit number of Ipv6 Subnet.
 Ipv6 Default Gateway
Enter the designated Ipv6 Gateway.
 Ipv6 Link Local
Display Ipv6 Link Local.
Port
 Base Port (1025 ~ 65535)
Enter the Base Port Number. Network Base Port is used for communication with
remote clients. In order for camera’s decoders to connect to remote systems (For
Example: Decoder, VMS, NVR Software), the Port Number must be configured
identically on the camera /encoder side and client /decoder side.
 HTTP Port (80, 1025 ~ 65535)
Enter HTTP Port used for Web-Based Connection
 HTTPS Port (443, 1025 ~ 65535)
Enter HTTPS Port used for Secured HTTP Connection.
 RTSP Port (554, 1025 ~ 65535)
Enter RTSP Port used for RTSP-Based Connection. The default RTSP port is 554
RTSP (Real Time Streaming Protocol) is a standard for media streaming between
server and client.
Discovery
 UPNP
When UPNP is ON, it allows the discovery by the client according to UPNP (Universal
Plug and Play) protocol.
 Zeroconf
When Zeroconf is ON, it allows the discovery by the client according to Zeroconf
protocol.
 WS Discovery
Discovery function based on Web Service is enabled. It allows the discovery by Client
SW which is supporting Onvif.