User Manual

4- Remote Configuration
___________________________________________________________________________
User Manual VS-102 HDSD/HDI - V2.3 Page 25 of 64 5/7/12
 Motion Detection Area Editing
Configure regions to apply motion detection. Regions of arbitrary shape can be
configured by the following steps:
 Select Enable in the Edit Menu.
 In the Mode Menu, select Set to include cells in the motion detection region and
select Erase to excluding them.
 Select Cells by right clicking the mouse and dragging selection box until desired
area is highlighted.
 Press Apply Edited Area to save the selection.
 Sensitivity
Sensitivity is the level of movement that triggers the motion detection function. This
value determines the sensitivity of motion within a block; the smaller the number, the
more sensitive the motion detection becomes. Sensitivity ranges from 0 to 10.
Information Display
System ID and/or Server Time can be displayed over the video window in the Internet
Explorer Browser. Items can be turned on or off individually and the position also can
be configured. This information will be displayed after the video is decompressed.