User Manual

4- Remote Configuration
___________________________________________________________________________
User Manual VS-102 HDSD/HDI - V2.3 Page 24 of 64 5/7/12
 Bit Rate
Determine Bit Rate value between 32 ~ 10240kbps. Bit Rate Mode (CBR Encoding)
allows you to set a Fixed Target Bit Rate that consumes a predictable amount of
Bandwidth. In order to stay within the Bit Rate limit, Video Quality is controlled
dynamically according to the complexity or activity changes in the Input Video.
 I-Frame Interval
Determine I-Frame Interval between 1 and 255.
 H.264 Profile
Select H.264 Profile: High Profile or Baseline Profile
The standard defines various capabilities which are referred to as Profiles; targeting
specific classes of applications.
- High Profile (HiP)
The primary profile is for broadcast and disc storage applications; particularly for high-
definition television applications (For Example: this is the profile adopted by the Blu-Ray
Disc Storage Format and the DVB HDTV Broadcast Service).
- Baseline Profile (BP)
Primarily for low-cost applications that require additional data loss robustness, this
profile is used in some videoconferencing and mobile applications. This profile includes
all features that are supported in the Constrained Baseline Profile, plus three additional
features that can be used for loss robustness (or for other purposes such as low-delay
multi-point video stream compositing).
Dual Encode
 Use Dual Encode
1. Select the OFF button on the Enable Preview to enable the Dual Encoding.
2. Select the ON button on the Use Dual Encode to enable Dual Encoding.
The Secondary Video can be viewed on the Live View window by selecting Secondary
on Video Selection.
 Dual Encode Algorithm
Select H.264 or MJPEG for the Secondary Streaming. With H.264, either Bit Rate
Mode or Quality Mode can be selected for the Preference Mode. MJPEG supports
Quality Mode only.
Motion Detection
 Use Motion Detection
Determine if the Motion Detection function will be used.