User Manual

4- Remote Configuration
___________________________________________________________________________
User Manual VS-102 HDSD/HDI - V2.3 Page 20 of 64 5/7/12
General
 System ID
Enter System ID which is used as the Camera Title Name. The set System ID is
displayed with Video Image on the Web Browser. The System ID is also transferred to
and displayed on the remote software, such as VMS.
 Burn In OSD System ID
Burn In OSD System ID specifies the string to be inserted into the Video Image before
encoding. Only alphanumeric and blank characters are allowed. Position and size can
be configured on this section of the Video Page.
 Language
Select the Language to be used for Web-Based Configuration.
Firmware
 Firmware Version
Display the Current Firmware Version.
 Board ID
Display the Network Board ID of the Camera recognized by system.
 Upgrade
Upgrade Firmware:
1. Press the Browse Button to select a Firmware File from PC.
2. Press the Firmware Upgrade Button to start the upgrade.
3. Messages to show status (“Downloading” / “Upgrading”) will be displayed.
4. The camera will reboot automatically after completing the upgrade.
Do not turn off the camera during upgrading.
Config Backup & Restore
 Backup
All the settings of the configuration can be saved and stored.