Quick start Guide

On the AUDIO Setup Page make certain that the
selections are as shown to the right.
Many of the functions that follow must be performed from a device that is connected to the internet with a
functioning web browsing program like Internet Explorer, Safari, Firefox, or Google Chrome. The device is of your
choosing and can be a PC, Smart Phone, or Tablet.

 ÜThis can be done with the PS-102 offline.
Ü You will need the following:
   Access to the Internet
  The PS-102 MAC Address found on the unit itself or on the outside of the box.
  A valid Credit card
The PS-102 is designed solely for use with the StreamVu
TV service. Upon receipt of your PS-102 the unit must be
registered to an active StreamVu account to function.
1. Activate an account with the StreamVu
service from their web site
http://www.streamvu.com.
Select Packages & Pricing from the home menu.
AUDIO Setup Page
1. Algorithm AAC
2. Bitrate 128kbps
3. Mode TX-only
4. Input Gain. May be adjusted as necessary
25 is Unity Gain
5. Audio Output Loopback
4. Establish your Producers Account
Registering the PS-102 to Your StreamVu Account
8
3. Configuration
PLEASE NOTE:
When you are finished making changes
to the AUDIO Set up page click “Apply“
to save your changes and then select the
NETWORK Tab at the top of the page...
On the Network page change the IP MODE to DHCP and click “Apply“