Specifications

THE SHALLECK COLLABORATIVE SANTA ROSA CITY COUNCIL
AV SYSTEMS UPGRADE
April 6, 2012 27 41 16  7 AV SYSTEMS
100% CD
3. Streaming
a. The owner shall provide a streaming encoder with composite video and stereo audio
inputs. Bring audio and video inputs to a bulkheadtype patch bay for connection to
the switcher as needed.
4. Utility
a. For cable TV confidence monitoring, provide a small LCD panel with integrated CATV
tuner.
b. A VGA to HDSDI scan converter, a video distribution amplifier, and an HDSDI
distribution amplifier shall be provided. and a sync/test generator shall be provided.
c. Provide bulkhead type XLR and BNC patchbays for audio and video as indicated in
the drawings, complete with patchcords in quantities indicated. Provide ultraflexible,
highly robust patchcord style XLR and BNC cables, similar to a standard patch
cable.
d. Provide a UPS unit. Fan shall only operate when UPS is running on battery power.
e. Provide inrack power sequencing and protection systems.
f. Provide a furniture system for the broadcast control desk as shown in the drawings.
1) Base module: Winsted LCD/3 Console with central cableway, floor levelers,
footrest and all necessary hardware.
2) Finishing Panels: Provide exterior steel finishing panels for sides & top of
assembly. All steel parts shall be provided in black, all wood parts shall be
finished using a manufacturer standard laminate, to be determined during the
submittal phase.
3) Work Surface. Provide continuous work surface, made of MDF with high
pressure laminate.
4) Provide sliding rack drawers for any unused rack space in the lower rack section,
and provide blank panels for any unused rack space in the upper section.
5. Control System
a. Provide a 5.7” color touchscreen in the broadcast control room to enable the
broadcast technician to control the presentation AV system. Separate controls shall
be provided for both training room and broadcast feeds. Broadcast feed controls
shall only be available on this touchpanel, and not on the training room control
panels.
b. Provide all necessary interfacing and programming for the existing control system
necessary to facilitate these changes.
C. Presentation Systems
1. Audio DSP Programming
a. Updates to the (e) audio DSP will be required, and are in the scope of this work.
Provide as necessary to facilitate complete operation.
b. A DSP expansion device shall be provide and fully integrated into the system.
c. Provide one new microphone input at each of three (e) floor boxes. The new
microphone input shall be used in conjunction with a portable conferencing system.
Configure the DSP inputs as necessary.
d. Provide new input panels in each floor box, maintaining all connectivity. The new
input panel shall be properly sized for the floor box. Discard (e) input panel.
2. Video Systems  Display