Marshall Electronics V-R151DP-AFSD • V-R151DP-AFHD SD/HD Video LCD Monitor Operating Instructions
Contents Product Overview..................................................................................................................................................... 3 Features .................................................................................................................................................................... 3 Installation and Initial Setup ................................................................................................................................
Product Overview The V-R151DP-AFSD/AFHD is a 15” SD/HD video LCD monitor, featuring our completely digital TFT-MegaPixel™ active matrix LCD system. Occupying only 6 RU and only 1.77” deep, this monitor is an ideal lightweight replacement for CRTs used in all broadcast and professional video applications. Emulation of SMPTE-C/EBU color and adjustable color temperature enable the most precise color representation possible.
Installation and Initial Setup ■ Unpacking Carefully unpack the V-R151DP-AFSD/AFHD monitor and verify that the following items are included: • V-R151DP-AFSD/AFHD Monitor with Attached Rack Ears • V-PS12-5V-1 Power Supply with Conxall 2-Pin Twist-Lock Connector • Operating Instructions Inspect the unit for any physical damage that may have occurred during shipping. Should there be any damage, immediately contact Marshall Electronics at (800) 800-6608.
Front Panel Features 1 Power Button Turn the monitor on by pressing the power button. In the OFF state, the LED will shine brightly. The LED will dim when the monitor is turned on. 2 Input Select Buttons 1 Use the input select buttons to select the input to be displayed: • • • • • • Video S-Video YPbPr (SD/HD) VGA DVI SDI (HD on V-R151DP-AFHD) 2 Each input automatically detects the applicable formats (See Compatible Input Formats – Page 7).
Rear Panel Features 1 4 3 2 Rear Panel 1 Power Input Connect the 12VDC input to the Conxall 2-pin twist-lock power input connector. Power can be supplied from the included power supply, or from a variety of DC sources supplying at least 3 Amps at 12 Volts.
Compatible Input Formats Format Composite S-Video YPbPr SDI NTSC ● ● PAL ● ● 480i / 59.94 ● ● 576i / 50 ● ● 485p / 59.94 ● ●* ● 576p / 50 ● ●* ● ● 1035i / 60 ● ●* 1035i / 59.94 ● ●* 1080i / 60 ● ●* ● ● 1080i / 59.95 ● ●* ● ● 1080i / 50 ● ●* ● ● 1080psF / 24 ● ●* ● ● 1080psF / 23.98 ● ●* ● ● 1080p / 30 ● ●* 1080p / 29.97 ● ●* 1080p / 25 ● ●* 720p / 60 ● ●* ● ● 720p / 59.94 ● ●* ● ● 720p / 50 ● ●* ● ● 720p / 30 ● ●* 720p / 29.
On-Screen Menu STRUCTURE OVERVIEW MARKER SETUP MARKER 16:9 OFF, 13:9, 14:9, 4:3, 2.35:1, 1.
On-Screen Menu (continued) MARKER SETUP SUBMENU Marker Setup Submenu ■ 16:9 Markers Use this setting to superimpose one of 10 markers on the screen when in 16:9 mode. This setting is disabled when the aspect ratio is set to 4:3, or when Pixel-to-Pixel™, Underscan, or H/V Delay is enabled. • • • • • • • • • • • OFF (No Marker) 13:9 Aspect Ratio 14:9 Aspect Ratio 4:3 Aspect Ratio 2.35:1 Aspect Ratio 1.
On-Screen Menu (continued) MARKER SETUP SUBMENU (continued) ■ 4:3 Markers Use this setting to superimpose one of 5 markers on the screen when in 4:3 mode. This setting is disabled when the aspect ratio is set to 16:9, or when Pixel-to-Pixel™, Underscan, or H/V Delay is enabled.
On-Screen Menu (continued) VIDEO CONFIGURATION SUBMENU Video Configuration Submenu ■ Color Temperature Presets Use this setting to choose one of three color temperature presets: • • • • D55 (5500K) D65 (6500K) D93 (9300K) USER (Adjustable Color Bias and Gain) ■ Adjusting Color Bias Color Bias Menu Use this submenu to adjust bias of the color response. Adjust the bias for each color to alter the white balance of the image.
On-Screen Menu (continued) VIDEO CONFIGURATION SUBMENU (continued) ■ Monochrome Mode Use this setting to enable monochrome mode. Only the luminance of the image will be displayed as a grayscale picture. ■ Blue-Only Mode Use this setting to enable Blue-Only mode. This mode displays only the blue color component of the image, switching off the red and green components. Use this mode when calibrating the monitor to SMPTE color bars with the following procedure: 1.
On-Screen Menu (continued) VIDEO CONFIGURATION SUBMENU (continued) ■ Aspect Ratio Settings Use to switch between 4:3 and 16:9 aspect ratios. As the V-R151DP-AFHD monitor has a native resolution of 1024 x 768 RGB pixels, incoming images are automatically scaled to fit the screen: • In 4:3 mode, images are scaled up or down to fill the entire 4:3 screen (1024 x 768).
On-Screen Menu (continued) SYSTEM CONFIGURATION SUBMENU Video Configuration Submenu ■ Internal SMPTE Color Bars Use to display internally generated SMPTE split-field color bars. ■ User-Definable Function Buttons Use the FUNCTION 1 and FUNCTION 2 menu items to define each function button on the front panel of the monitor. The following options are available for each button: • • • • • • • • DELAY RATIO BACK CENTER MARKER MONO CTEMP PTP Enable and rotate amongst delay modes.
Specifications ■ PANEL ■ TALLY Screen Size Display Area (h x v) Aspect Ratio Pixels Color Depth Viewing Angle Brightness Contrast Ratio Dot Pitch (h x v) Pixel Pitch (h x v) Pixel Response 15.0” Diagonal 304.128 x 228.096 mm 4:3 Native (4:3/16:9 Modes) 1024 x RGB x 768 16,777,216 Colors 150° x 150° 2 500 cd/m 450:1 0.099 x 0.297 mm 0.297 x 0.297 mm 25 ms (rise + fall) ■ VIDEO INPUT/OUTPUT Video Input / Output Supports SMPTE 170M, NTSC/PAL Color sub-carrier required 3 LEDs (Green, Red, Yellow).
Specifications (continued) Maintenance ■ Screen Cleaning Periodically clean the screen surface using ammonia-free cleaning wipes (Marshall Part No. V-HWP-K). A clean microfiber cloth can also be used using only non-abrasive and ammonia-free cleaning agents. Do not use paper towels. Paper towel fibers are coarse and may scratch the surface of the polycarbonate faceplate or leave streaks on the surface. Antistatic and fingerprint resistant cleaning agents are recommended.