Specifications

• TFT-MegaPixel™totallydigital
• Multipleformatacceptanceforvirtuallyanyanalogvideosignal
• DisplayPCSignalstoXGA1024x768
• ColorMatchConversion™withSMPTE/EBUcolorspaceemulationofCRT
• ColortemperaturepresetforD65
• HyperProcess™motioninterpolationofinterlaceimages
• Onscreendisplayofinputstatus,formats,andmenufunctions
• PixeltoPixel™nativeresolutiondisplay
• Readytomount–allbracketsarefactoryinstalled
• Lightweight–75%lighterthanCRTmodels
• Settingsmemoryrestoresactivestatewithpoweroff/oncycle
• UnderscanplusH&Vdelay
• Blueonly(BlueGun)foradjustmenttoSMPTEcolorbars
• IncludesV-PS12-5V-1Universalpowersupply(U.L.class2)
• ThreeLEDs(Red,Green,Amber)produce7differenttallyindicationsoneachscreen
• Dryeraselabelforeachscreen
The V-R104DP-HD features our Completely Digital TFT-Megapixel™ high denition TFT/LCD system with 1.44 million pixels.
Analog signals are digitized using an advanced 10 bit process with 4x over sampling and adaptive 5 line comb lter plus exacting
color space conversion. Video is scaled to t on screen in the highest resolution using a state of the art LSI that incorporates 6x6 pixel
adaptive motion interpolation with precision Gamma correction. Additional features include Pixel-to-Pixel™ native resolution scaling,
setup memory, Underscan, H/V Delay, adjustable color temperature, and Blue Gun.
1
Product Overview
2
Features
4
Electrical Specifications
ScreenAspect 4:3/16:9 switchable
Display(ViewingArea) 10.4 Inch diagonal (211.2mm w x 158.4mm h)
ViewingAngles 130° H x 120° V
Resolution(RGBDots) 800H×RGBx600V (1.44 million pixels)
ColorDepth 262,000 Colors (6-Bit)
DotPitch .213mm square pixel
ContrastRatio 350:1
PixelResponse 10ms rise/25ms fall
Brightness(incd/m²) 500 cd/m²
LCDScreenTreatments Anti Reflection, Anti Glare, Hardcoat
System NTSC/PAL with auto recognition
Inputs HDSDI/SDI (SMPTE259M, 292M) (ITR-U601) per screen (BNC)
YPrPb Component (3 BNC)
Composite Video PAL/NTSC auto detect (BNC)
S-Video (Y/C) (4 Pin Mini Din female)
XGA 15Pin HD-15 Female
DVI 27 (Pin DVI-I Female)
Tally (HD-15 Female)
ActiveOutputs HDSDI/SDI (SMPTE259M, 292M) (ITR-U601) per screen (BNC)
YPrPb Component (3 BNC)
Composite Video PAL/NTSC auto detect
Colortemperature D65 and User Adjustment
ColorGamut SMPTE-C/EBU 80% CIE
LumaLinearity Typical +/- 3% with 5 IRE increments (0 to 10 IRE)
PowerRequired 10.8 to 13.2 VDC
PowerConsumption Approx. 40 watt nominal
Operatingtemperature
32° F to 120° F (0° C to 50° C)
Storagetemperature
-4 F to 120° F (-20° C to 50° C)
Compliance
₠, FCC-Class A, ANSI-63.4 (Certificates on file)
RoHSWEE/Environmental
Do not dispose. Return to Manufacturer or Authorized Recycle Facility
9
2
V-R104DP-HD Users Guide
Marshall Electronics
• 525 –60i / 625 - 50i (Interlaced NTSC/PAL)
• 480P (Progressive)
• 576P (Progressive)
• 720P-50P, 59.94P, 60P, 25P, 29.97P, 30P, 50P, 59.94P, 60P (Progressive)
• 1035i - 59.94i, 60i (Interlaced)
• 1080i x 1920 – 50i, 59.94i, 60i, 23.973P, 24P, 25P, 29.97P, 30P, 24psf, 23.97psf
Allsignaltypesandframeratesareautomaticallydetected
3
Video - Screen Formats and Frame Rates
11
Menu Functions
1.PowerOn/OffButton
Illuminates Red when system power is present. Illuminates Green when monitor is ON.
2.SourceSelectionButtons
Video - Composite NTSC or PAL. Composite video must comply to SMPTE-RS170M.
Images without color burst (Subcarrier) component may not display.
S-Video - Y/C (Luminance + Chrominance) NTSC or PAL.
YPrPb - Analog Component color difference signals for Standard Denition (YCrCb) or High Denition (YPrPb).
VGA- Analog PC.
DVI- Digital Computer or Video Signals. Includes HDCP for use with HDMI originated signals.
HDSDI - Digital Input for Standard Denition (SDI-270Mbs) or High Denition (HDSDI - 1.485Gb/s).
3.PixeltoPixelFunction
As the native LCD displays of the V-R104DP-HD are 800 pixels wide by 600 dots (RGB pixels) high, it is necessary to change the size
of the image to ll the whole screen. Pixel to Pixel mode bypasses the enlargement/shrink of this scaling function and displays the
native incoming format.
For525-NTSC/480Pbasedimages, pixel to pixel will appear as a 480x640 (4:3 aspect) or 480x720 (16:9 aspect).
For625-PAL/576Pbasedimages, pixel to pixel will appear as a 576x640(4:3 aspect) or 576x720 (16:9 aspect).
For1080lineHDbasedimages, pixel to pixel will appear as cropped 800x600 (4:3 aspect) starting from the center of the
image. 240 lines top, 240 lines bottom, 560 pixels left and 560 pixels right will be cropped.
For720lineHDbasedimages, pixel to pixel will appear as cropped 800x600 (4:3 aspect) with 60 lines from the top and 60 lines
from the bottom cropped. Horizontally, 240 pixels will be cropped from each edge.
3.MenuEnableandnavigation
Access menu functions by selecting the MENU button. Use UP/DOWN to navigate and
SELECT to enable or disable the function
Note: Source selection is disabled when in menu mode.
ColorTemperature
D-65(6500K) - Standard setting recommended by SMPTE and EBU.
Simulates normal daylight conditions.
USER - When activated manual adjustment is performed by selecting
Adj.ColorGain or Adj.ColorBias
When in adjust mode use UP/DOWN to change values. Use SELECT to cycle RED, GREEN,
and BLUE mode. Exit to the main menu by pressing MENU.
Left Line= Increase of Gain
Center Line = D65 (Default)
Right Line = Decrease of Gain
Right Line= Increase of Bias
Center Line = D65 (Default)
Left Line = Decrease of Bias
LevelSet-up
SELECT between 7.5 IRE for NTSC signals and 0 IRE for NTSC Japan and PAL signals.
7.5 mode will enable a digital black offset of the onscreen images for improved Blacks.
ColorBar
Use to SELECT internal test signal of full eld color bars that is available for conrmation
of LCD operation. This function will disable input selection until cycled off.
H/VDelay
Use to SELECT display of horizontal and vertical blanking areas.
Not available for all signal types.
UnderScan
Use SELECT to reduce the display area with expansion beyond active video. Note that the
V-R104DP-HD is factory adjusted to display 100% of active video in standard display mode.
This function is normally used with analog Standard denition signals.