Marshall Electronics V-R1041DP-AFHD Portable High Definition LCD Monitor Operating Instructions
Contents Product Overview..................................................................................................................................................... 4 Features .................................................................................................................................................................... 4 Installation and Initial Setup ................................................................................................................................
Product Overview The V-R1041DP-AFHD is a 10.4” high definition LCD monitor featuring our completely digital TFT-MegaPixel™ active matrix LCD platform. Weighing only 3.28 lbs, this monitor is ideal as a light-weight high resolution viewfinder or focusassist monitor. The V-R1041DP-AFHD can also be rack-mounted with an optional 4RU adapter, or used in a desktop configuration with optional desktop stand.
Installation and Initial Setup ■ Unpacking Carefully unpack the V-R1041DP-AFHD monitor and verify that the following items are included: • V-R1041DP-AFHD Monitor • V-PS12-5V-XLR Power Supply with 4-Pin XLR Connector • Operating Instructions Inspect the unit for any physical damage that may have occurred during shipping. Should there be any damage, immediately contact Marshall Electronics at (800) 800-6608. If you are not located within the continental United States, call +1 (310) 333-0606.
Front Panel Features 6 Top Front Panel Lower Front Panel 1 2 1 Power Button Turn the monitor on by pressing the power button. In the OFF state, the LED will shine red. The LED will shine green when the monitor is turned on. 4 3 5 4 User-Definable Function Buttons Two user-definable function buttons can be used for direct access to various settings. Functions are assigned using the on-screen menu (See UserDefinable Function Buttons – Page 15).
Rear Panel Features 4 1 3 2 Rear Panel 1 Power Input Connect the 12VDC input to the 4-Pin XLR power input connector. Power can be supplied from the included power supply, or from a variety of DC sources supplying at least 2 Amps at 12 Volts.
Compatible Input Formats Format Composite S-Video YPbPr SDI VGA NTSC ● ● PAL ● ● DVI-D 525i ● ● ● 625i ● ● ● 486p / 59.94 ● ● 576p / 50 ● ● 1035i / 60 ● ● 1035i / 59.94 ● 1080i / 60 ● ● ● 1080i / 59.95 ● ● ● ● 1080i / 50 ● ● ● ● 1080psF / 24 ● ● ● ● 1080psF / 23.98 ● ● ● ● 1080p / 30 ● ● 1080p / 29.97 ● ● 1080p / 25 ● ● 720p / 60 ● ● ● ● 720p / 59.94 ● ● ● ● 720p / 50 ● ● ● ● 720p / 30 ● ● 720p / 29.
On-Screen Menu STRUCTURE OVERVIEW MARKER SETUP MARKER 16:9 OFF, 13:9, 14:9, 4:3, 2.35:1, 1.
On-Screen Menu (continued) MARKER SETUP SUBMENU Marker Setup Submenu ■ 16:9 Markers Use this setting to superimpose one of 10 markers on the screen when in 16:9 mode. This setting is disabled when the aspect ratio is set to 4:3, or when Pixel-to-Pixel™, Underscan, or H/V Delay is enabled. • • • • • • • • • • • OFF (No Marker) 13:9 Aspect Ratio 14:9 Aspect Ratio 4:3 Aspect Ratio 2.35:1 Aspect Ratio 1.
On-Screen Menu (continued) MARKER SETUP SUBMENU (continued) ■ 4:3 Markers Use this setting to superimpose one of 5 markers on the screen when in 4:3 mode. This setting is disabled when the aspect ratio is set to 16:9, or when Pixel-to-Pixel™, Underscan, or H/V Delay is enabled.
On-Screen Menu (continued) VIDEO CONFIGURATION SUBMENU Video Configuration Submenu ■ Color Temperature Presets Use this setting to choose one of three color temperature presets: • • • • D55 (5500K) D65 (6500K) D93 (9300K) USER (Adjustable Color Bias and Gain) ■ Adjusting Color Bias Color Bias Menu Use this submenu to adjust bias of the color response. Adjust the bias for each color to alter the white balance of the image.
On-Screen Menu (continued) VIDEO CONFIGURATION SUBMENU (continued) ■ Monochrome Mode Use this setting to enable monochrome mode. Only the luminance of the image will be displayed as a grayscale picture. ■ Blue-Only Mode Use this setting to enable Blue-Only mode. This mode displays only the blue color component of the image, switching off the red and green components. Use this mode when calibrating the monitor to SMPTE color bars with the following procedure: 1.
On-Screen Menu (continued) VIDEO CONFIGURATION SUBMENU (continued) ■ Aspect Ratio Settings Use to switch between 4:3 and 16:9 aspect ratios. As the V-R1041DP-AFHD monitor has a native resolution of 1024 x 768 RGB pixels, incoming images are automatically scaled to fit the screen: • In 4:3 mode, images are scaled up or down to fill the entire 4:3 screen (1024 x 768).
On-Screen Menu (continued) SYSTEM CONFIGURATION SUBMENU Video Configuration Submenu ■ Internal SMPTE Color Bars Use to display internally generated SMPTE split-field color bars. ■ User-Definable Function Buttons Use the FUNCTION 1 and FUNCTION 2 menu items to define each function button on the front panel of the monitor. The following options are available for each button: • • • • • • • • DELAY RATIO BACK CENTER MARKER MONO CTEMP PTP Enable and rotate amongst delay modes.
Specifications ■ PANEL ■ TALLY Screen Size Display Area (h x v) Aspect Ratio Pixels Color Depth Viewing Angle (h x v) Brightness Contrast Ratio Dot Pitch (h x v) Pixel Pitch (h x v) 10.4” Diagonal 210.432 x 157.824 mm 4:3 Native (4:3/16:9 Modes) 1024 x RGB x 768 24-bit (16,777,216 Colors) 170° x 170° 300 cd/m2 700:1 0.0685 x 0.2055 mm 0.2055 x 0.
Specifications (continued) Maintenance ■ Screen Cleaning Periodically clean the screen surface using ammonia-free cleaning wipes (Marshall Part No. V-HWP-K). A clean microfiber cloth can also be used using only non-abrasive and ammonia-free cleaning agents. Do not use paper towels. Paper towel fibers are coarse and may scratch the surface of the polycarbonate faceplate or leave streaks on the surface. Antistatic and fingerprint resistant cleaning agents are recommended.
Optional Accessories ■ Batteries • IDX-E7S • IDX-E7 • IDX-E10S • IDX-E10 71Wh/4.8Ah Lithium Ion V-Mount Battery Pack 71Wh/4.8Ah Lithium Ion V-Mount Battery Pack with PowerLink 98Wh/6.6Ah Lithium Ion V-Mount Battery Pack 98Wh/6.
Warranty Marshall Electronics warranties to the first consumer that this V-R1041DP-AFHD LCD monitor will, under normal use, be free from defects in workmanship and materials, when received in its original container, for a period of one year from the purchase date. This warranty is extended to the first consumer only, and proof of purchase is necessary to honor the warranty.
02-0216 Marshall Electronics, Inc. 1910 East Maple Ave. El Segundo, CA 90245 Tel: (800) 800-6608 / (310) 333-0606 • Fax: 310-333-0688 www.LCDRacks.com • sales@lcdracks.
