Instruction manual

FEATURES
www.bhphotovideo.com
MONITORS & ACCESSORIES
SONY
LMD-1410 • LM D-1420 • LMD-2030W
554
Input Versatility
They are equipped with a full range of
analog SD inputs including analog
composite (NTSC and PAL), S-Video, and
525i/625i component and RGB.
The LMD-1420 and LMD-2030W can also
handle SD-SDI signals by using the optional
BKM-320D SD-SDI input adapter. The
LMD-2030W (only) offers an HD signal input
capability via its standard HDMI and Analog
Component interface.
High Picture Performance
They come equipped with high-purity RGB
color filters, allowing the reproduction of
colors with stunning depth and saturation.
The monitors also provide high brightness,
high-contrast images.
The LCD panels provide a wide viewing
angle of 178° for the LMD-2030W, and
170° for the LMD-1420 and LMD-1410, both
horizontally and vertically, with minimal
reduction in picture contrast. This allows
images to be viewed from various positions
and angles.
14- and 20” Luma Series LCD Video Monitors
The LMD-2030W, LMD-1420 and LMD-1410 offer the best quality-per-cost ratio,
and a host of user-friendly features makes them perfect for convenient monitoring
in wedding and event videography, and many other applications.
Slim, light and compact the 14 LMD-1410 is designed for
basic SD (standard definition) applications. The all-in-one
design incorporates the control buttons, I/O board as well as
the monitor stand in one package. By employing the latest
640 x 480 dot VGA LCD panel, the monitor offers a picture
with high contrast and a wide viewing angle. The VGA panel
provides an accurate translation of interlaced to progressive
signals. The back of the LCD has a VESA standard mount with
100mm pattern allowing simple installation by using a wall
mount hanger or arm stand. Designed for more advanced SD (standard definition)
applications, the14” LMD-1420 steps up with an anti-reflection protection panel, Blue Only mode, safety marker, 4:3 zoom,
external sync, tally mode and an optional SDI input adapter. The 20” LMD-2030W is an entry-level HD monitor that accepts
HD signals via its HDMI or analog component connectors.
LMD-1420
LMD-2030W
The LMD-1420 and LMD-2030W can display
various area markers, including a center
marker and aspect markers. The brightness
of these markers can be selected from three
levels: white, gray, and dark gray. Users can
also select a black or gray matte to fill the
outer area of the aspect markers. These
flexible marker controls, together with the
choice of many different aspect markers,
make the monitors extremely convenient
display devices for a variety of shooting
scenarios.
Selectable color temperature (‘high, ‘low, or
user preset.
Selectable scan size for video input. The
scan size can be selected between 5% over-
scan and -3% underscan modes. The aspect
ratio can be switched between16:9 and 4:3
according to the input signal.
The LMD-1420 and LMD-2030W come
equipped with a 3-color tally lamp that can
be lit via a parallel remote connector.
The status of the signal displayed on the
monitor can be identified by the tally color -
red, green, or amber.
The monitors can be controlled remotely via
their parallel remote connectors. In the
remote menu, there are17 functions for the
LMD-2030W and 25 for the LMD-1420 and
LMD-1410 (such as the ability to switch
input signals), of which seven can be
allocated to the remote connector.
Setup level for analog composite and
component signals.
They are equipped with a 0.5-watt speaker
which enables monoaural audio monitoring.
Key-inhibit function helps prevent inadver-
tent operation from the control panel.
The LMD-1420 and LMD-2030W feature
Blue-Only mode and external sync input.
The LMD-1420 (only) offers 4:3 Zoom.
Complying with VESA (100 x 100mm)
standards, the monitors can easily be wall
or ceiling mounted.
They can be mounted in a 19” rack using
optional mounting brackets. The 9U-high
LMD-2030W uses the MB-529, and the
7U-high LMD-1420 and LMD-1410 use the
MB-526 mounting brackets.
Operational Convenience
PHOTO - VIDEO - PRO AUDIO