Instruction manual

www.bhphotovideo.com
MONITORS & ACCESSORIES
MARSHALL ELECTRONICS
LCD RACKS
530
PHOTO - VIDEO - PRO AUDIO
V-R63P
Triple 5.8” Wide-Screen Rack-Mounted LCD Panel
The V-R63P has three independently controlled 5.8” high resolution
(1200 x 234) active matrix LCD panels with active loop through. Each of
the screens has a built-in color bar generator, controls for brightness,
color, tint, contrast, and selectable 16:9/4:3 aspect ratio. Each panel
accepts dual composite video inputs with selectable NTSC/PAL switch.
Built in 3-color self-powered tally system for each screen. Unique 100°
tilt adjustment while mounted in any standard19” (3RU high) rack.
◆ Ultra bright 350 cd/m² (candle luminance).
◆ Dual composite video inputs per display with switchable NTSC/PAL
and 4:3 /16:9 ratios.
◆ Auto Signal Detection, blue screen appears when signal is not present.
◆ Individual color, tint, brightness and contrast controls for each panel.
◆ Built-in memory saves current setup when unit is powered down.
◆ Dry Erase Marker for EZ Identifying of screens is included.
V-R63P: Triple 5” Monitor Rack
(Mfr # V-R63P • B&H # MAVR63P) ..........2559.95
V-R63P-SDI
Triple 5.8” Wide-Screen Rack-Mounted LCD Panel
Same as the V-R63P (above), except the V-R63P-SDI exchanges one of
the two composite inputs (per display) for an SDI input with reclocked
loop through feature, and three built-in10-bit SDI to composite video
D/A converters.
(Mfr # V-R63P-SDI • B&H # MAVR63PSDI)...............................3094.95
V-R653P-HDSDI
Triple 6.5” Serial Digital HD/SD Monitor Set
The rackmounted and 100° tiltable V-R653P-HDSDI features three high
resolution (800 x 480) 6.5” screens with completely digital signal pro-
cessing. Standard and high definition SDI inputs are accepted and dis-
played on each screen. All video formats are scaled to fit on screen in
the highest resolution using a state of the art LSI with precision Gamma
correction to produce the best images available. Each screen is calibrat-
ed to SMPTE standards for gamma and color temperature.
◆ Ultra bright 500 cd/m² (candle luminance), with wide viewing angle
(130° horizontal, 120° vertical) and 500:1contrast ratio with response
rates less than 30ms.
◆ 4:3 and16:9 aspect ratios for DTV applications in HD and SD formats.
◆ Blue Gun for color adjustment, easy to see three color tally indicators.
◆ Three (one per monitor) SD/HD SDI inputs (all formats and frame
rates), and SD/HD digital signal indicators. Re-clocked and shaped
output of all input signals.
V-R653P-HDSDI:
(Mfr # V-R653P-HDSDI • B&H # MAVR653PHDSD) ..............2959.95
V-R653-IMD-TE
Triple 6.5” SD/HD Rack Mounted Monitor Set
with HDSDI/SDI Inputs and In-Monitor Display
An “all-in-one” solution for post production houses, broadcasters, and
mobile units, the V-R653-IMD-TE (In-Monitor Display) eliminates the
need for additional or separate under monitor displays and allows UMD
information and tallies to be displayed directly within the monitor,
while saving precious rack space. A variety of features are readily
available including on-screen timecode, three-color “Soft” Tallies, and
Audio Presence Indicator. Also includes the RotoMenu feature which
allows fast, direct, and easy menu navigation.
◆ Integrates easily with existing Tally systems and controllers, while
supporting Image Video, NVISION, and MEI protocols.
◆ Ready to rackmount (4RU high), it provides up to 20% more screen
compared to competitors’ LCD models that occupy the same space.
Also a perfect solution for large video wall applications and systems.
◆ Can also be used as standalone displays, each screen offers a single
HDSDI/SDI input with active loop-through capability.
◆ 600 cd/m2 luminance for enhanced image quality in varying light
and viewing conditions
◆ 600:1ratio of contrast between black and white luminance values
◆ 3-color on-screen “soft” and LED tally indicators (Red, Green, Amber)
◆ On-screen video timecode and audio presence indicator
◆ RS-422 port with loop-through for control communication / IMD
functionality. Field upgradeable firmware capable via RS-422 port
◆ Built-in Color Bars with Blue Gun for color adjustment
◆ Direct access for adjustments of brightness and contrast
◆ 6 Frame Marker Overlays with Center Mark
◆ Pixel-to-Pixel mode
◆ Adjustment Settings Memory
V-R653-IMD-TE
(Mfr # V-R653P-IMD-TE • B&H # MAVR653PIMDT).................4299.95
V-R653SB-IMD
Triple 6.5” SunBright SD/HD Rack Mounted Monitor
Set with HDSDI/SDI Inputs and In-Monitor Display
Coming in the 3rd quarter, the V-R653SB-IMD combines Marshall’s
SunBright and IMD (In-Monitor Display) technology. Consisting of three
6.5” monitors, they are designed specifically for outdoor applications
with high ambient light, minimizing surface reflection of both outdoor
and indoor light, while featuring a much wider color reproduction
range than typical transflective/reflective LCDs or even those with
increased backlight performance. All this, while eliminating the need
for additional or separate under monitor displays.