Specifications

20
IMD & TALLY CONFIGURATION
■
Text Enable
Use the Text Enable function to turn the MD Text feature ON. This will cause the Text String to appear on the lower portion
of the screen.
■
Text String
Use this field to enter your own 16 character string on the screen.
■
Text Color
Use this field to change the color of the text in the Text String field.
■
Text Background
Use this field to change the opacity of the background behind the text in the Text String field. A value of 0% will cause the
background to appear black. A value of 100% will make the background invisible.
■
Text Alignment
Use this field to change the alignment of the text string mentioned above.
■
Tally Source
Use this setting to change the source of the LED tally lights. Choosing the HD-15 (Contact Closure) option will render the LAN
Tally interface disabled. Choosing the LAN 100 option will also render the HD-15 (Contact Closure) connector inoperable.
■
LED Tally
Use the LED Tally option to turn the physical LED tally lights ON or OFF.
13
6. Disable Monochrome mode.
7. Enable Blue Check Field mode and adjust the Color button so that the outermost bars (white and blue) appear to
match in brightness.
8. Composite NTSC only: Adjust the Tint button until the third bar from the left (cyan) and the third bar from the
right (magenta) appear to match in brightness.
9. Disable Blue Check Field mode.
■
Ratio Settings
Use to switch between 4:3 and 16:9 aspect ratios.
• In 4:3 mode, images are scaled to fill the center 4:3 portion of the screen. With a 16:9 source, images will be centered
with a black letter-box added on the left and right sides.
• In 16:9 mode, images are scaled to a 16:9 portion of the screen , with a black letter-box added top and bottom.
Note: The aspect ratio setting is ignored when Pixel-to-Pixel mode is enabled.
■
Pixel-to-Pixel
Use this setting to enable Pixel-to-Pixel mode.
This Pixel-to-Pixel mode bypasses the monitor’s internal scaling function and displays incoming images in their native
resolution and aspect ratio, with a one-to-one mapping:
• For incoming formats smaller than the native resolution of the LCD panel, the image will be displayed in the center of
the screen using only the necessary LCD pixels. For example, NTSC images will occupy exactly 720 x 480 pixels. The
surrounding pixels will be black.
Note: Pixel-to-Pixel mode disables aspect ratio control and H/V Delay.
MARKER CONFIGURATION SUBMENU
Use the Video Configuration submenu to select various video settings such as monochrome mode or blue-only mode.