User Manual

Specifications
■
PANEL
V-MD503
Screen Size 5” Diagonal
Display Area (h x v) 108.0 x 64.8 mm
Aspect Ratio 15:9 Native
Pixels 800 x RGB x 480
Color Depth 8-bit
Viewing Angle (h x v) 85° x 85°
Brightness 300 cd/m
2
Contrast Ratio 600:1
Pixel Pitch (h x v) 0.135 mm x 0.135mm
V-MD434
Screen Size 4.3” Diagonal
Display Area (h x v) 93.0 x 55.8 mm
Aspect Ratio 15:9 Native
Pixels 800 x RGB x 480
Color Depth 6-bit
Viewing Angle (h x v) 65° x 65°
Brightness 200 cd/m
2
Contrast Ratio 400:1
Pixel Pitch (h x v) 0.116 mm x 0.116mm
Burn-In Warning
The V-MD503 and V-MD434 uses a high quality TFT
LCD panels. However, if a static image is left on the
screen for 48 hours, there may be a 10 to 20 minute
recovery period for the panel. During recovery, a very
faint image may be retained on the display. Put up a
white image for 30 minutes to eliminate the retained
image.
■
Modular Inputs
Marshall Electronics Type B Input Modules
■
CONNECTORS
Power Input
2-Pin Twist-Lock Connector
Tally Hardware Interface
HD-15 Female
RJ45 Ethernet Port
8P8C Female RJ45 Port
■
TALLY HARDWARE INTERFACE (HD-15)
Activation requires contact closure of pin to ground on
the HD-15 connector:
Note: The table above is specific to the V-MD434. For the V-
MD503, pins 5, 10 and 15 are N/C (No Contact) and should not
be used.
■
ELECTRICAL
V-MD503
Power Consumption 21 W
Voltage Requirement 12 VDC
V-MD434
Power Consumption 24 W
Voltage Requirement 12 VDC
V-PS12-5V-1 Power Supply:
Input 100V-240V, 1.5A, 50-60Hz
Output 12VDC, 5A, 60W Max
■
MECHANICAL
V-MD503
Dimensions (w x h x d): 19.12” x 3.4” x 1.73”
Weight (Without Modules): 2.52 lbs
V-MD434
Dimensions (w x h x d): 19.12” x 3.4” x 1.73”
Weight (Without Modules): 2.68 lbs
V-MD503 and V-MD434
Operating Temperature 32°F to 120°F (0°C to 40 °C)
Storage Temperature -4°F to120°F (-20°C to 50°C)
RoHs Do not dispose. Return to
Manufacturer or Authorized
Recycle Facility.