User Manual

32
Network Configuration
■
Remote Enable
Select whether you would like to be able to access a particular monitor’s web page or web functions from
another monitor on the same network.
■
Configuration Mode
Use this drop down menu to select between the different IP configuration modes available for the monitor.
■
IP Address
If you have selected the Manual configuration mode for the IP configuration mode, you will be able to enter an IP
address manually in this field. If you have selected DHCP, the box will have an IP address already entered.
This is not changeable when in DHCP mode.
■
Subnet Mask
If you have selected the Manual configuration mode for the IP configuration mode, you will be able to enter
Subnet Mask address manually in this field. If you have selected DHCP, the box will have Subnet Mask already
entered. This is not changeable when in DHCP mode.
■
Default Gateway
If you have selected the Manual configuration mode for the IP configuration mode, you will be able to enter
Default Gateway address manually in this field. If you have selected DHCP, the box will have Default Gateway
already entered. This is not changeable when in DHCP mode.
■
Host Name
Use this field to enter a Host Name for the V-MD434 or V-MD503 monitor. You may choose up to 16
alphanumeric characters for the Host Name.
■
Web Authentication
Fill in the Web Authentication box to protect the V-MD434 or V-MD503 monitor from being accessed by a user
without a User Name and Password. Filling this box in will enable the Username and Password fields below.
■
Username