User Manual

30
■
RGB Gain and Bias
Use this section to adjust the Gain and Bias for the Red, Green and Blue components of the video signal. This
can be done for each individual screen or globally. To enter a value manually, type in a number from 0-100 in
the dialogue box and press Set.
Backlight
■
Backlight
Use this section to adjust the Backlight value for each panel. This can be done for each individual screen or
globally. To enter a value manually, type in a number from 0-100 in the dialogue box and press Set.
Keypad Tab
Use the keypad portion of the Network Control page to access all aspects of the physical keypad from the Network
Control page. The GLOBAL column allows you to control a virtual Global Keypad that is like using all three
keypads at the same time.