Manual

30
Global
Use the Global tab to control multiple Marshall Electronics MD monitors simultaneously. Only the POWER, MENU and DISPLAY
tabs may be used on the GLOBAL scale. All other options must be used on an individual monitor basis.
To control monitors globally:
1) Click on the GLOBAL CONTROL tab on the bottom of the web page. This will display the GLOBAL CONTROL menu.
2) Press the SCAN NETWORK button at the bottom of the GLOBAL CONTROL menu. This will scan your network for any
other MD series monitors and list them under SELECT MONITORS TO CONTROL list.
3) Click on all monitors that you wish to control with the GLOBAL CONTROL settings.
4) Click on the POWER, MENU or DISPLAY buttons that you wish to control.
Scan Network
Use the Scan Network button to scan for any other Marshall Electronics MD monitor connected on your network. The results
will show up in the SELECT MONITORS TO CONTROL box.
SELECT MONITORS TO CONTROL box
This box will list any MD Series monitors found on your network. The box will list the following items about each monitor: Host
Name, IP Address, Model. The IDENTIFY section allows you to identify a particular monitor by toggling all 3 Tally LEDs at once.
Use this to determine which physical monitor you will be controlling.
Monitor Count
Use this count to quickly identify the number of Marshall Electronics MD monitors on your network.
7
Top and Front Panel Features
Power Button
Use the power button to toggle between ON and STANDBY
modes. In both the STANDBY and the ON state, the LED on
the button will illuminate bright green. This indicates that
MAIN power is applied to the unit.
Input Select Buttons
Use the VIDEO, YPbPr, S1 and S2 buttons to select the
corresponding analog or digital input. Video standards
(NTSC/PAL, etc.) are automatically detected. S1 and S2
buttons select inputs connected to Optional Input Modules
(located in Slot-1 or Slot-2).
User-Definable Function Buttons
Four user-definable function buttons can be used for direct
access to various settings. Functions are assigned using the on-
screen menu.
Menu Navigation Buttons
Use the Menu, ▲, ▼, and Select buttons to display and
navigate the on-screen menu (See Main Menu and
Navigation).
Image Adjustment Knobs
Use the image adjustment knobs to adjust color brightness,
color-saturation, tint, and contrast of the image. The status of
each image adjustment parameter is shown on the bottom left
of the screen, with values ranging from 0 to 100. Default value
is 50.
LED Tally
Three LED tally lights (yellow, red, green) are available above
the screen.