Manual

6
This page intentionally left blank
31
Specifications
■ PANEL
Screen Size 24” Diagonal
Display Area (h x v) 531.36 x 298.89 mm
Pixels 1920 x RGB x 1080
Viewing Angle (h x v) 178° x 178°
Brightness 300 cd/m2
Contrast Ratio 3000:1
■ VIDEO INPUT/OUTPUT
Video Input / Output (Composite)
Supports SMPTE 170M, NTSC/PAL
YP
B
P
R
Input / Output (Component)
Supports SMPTE 260M, 274M, 296M
■ CONNECTORS
Video Input
Video (Composite) 1 x BNC Female (75 Ω)
YP
B
P
R
(Component) 3 x BNC Female (75 Ω)
Video Output (Active Loop-Through)
Video (Composite) 1 x BNC Female (75 Ω)
YP
B
P
R
(Component) 3 x BNC Female (75 Ω)
S1, S2 (Module Slots)
For Marshall I/O Modules Only
Cold-Swap – remove power from unit before
Inserting or removing Modules.
Power Input
4-Pin XLR Connector
Tally Hardware Interface
HD-15 Female
CN-1 – Programming Port*
Factory / Upgrade Use Only
■ TALLY Hardware Interface (HD-15)
Activation requires contact closure of pin to ground
on the HD-15 connector:
■ ELECTRICAL
Power Consumption 3.5A @ 12VDC (42 W)
Voltage Requirement 12 VDC
■ MECHANICAL
Weight (with rack ears): 11.05 lbs
Operating Temperature 32°F to 104°F (0°C to 40°C)
Storage Temperature -4°F to120°F (-20°C to
50°C)
See Dimensions section for exact specifications.
Warning: Please use only the square type VESA
mount (which fits inside the VESA Screw Length
WARNING silkscreen) with the 75mm hole pattern in
order to avoid obstructing Module Slot 2.
. HD-15 Female
Ethernet Control Interface
RJ-45 6p6c Female Connector