Manual

14
■
Pixel-to-Pixel
Use this setting to enable Pixel-to-Pixel mode.
This Pixel-to-Pixel mode bypasses the monitor’s internal scaling function and displays incoming images in their native
resolution and aspect ratio, with a one-to-one mapping:
• For incoming formats smaller than the native resolution of the LCD panel, the image will be displayed in the center of
the screen using only the necessary LCD pixels. For example, NTSC images will occupy exactly 720 x 480 pixels. The
surrounding pixels will be black.
Note: Pixel-to-Pixel mode disables aspect ratio control and H/V Delay.
MARKER CONFIGURATION SUBMENU
Use the Video Configuration submenu to select various video settings such as monochrome mode or blue-only mode.
■
Marker Enable
Use this setting to enable or disable all on-screen markers. This setting affects the center marker, full screen markers, 16:9
markers and 4:3 markers.
■
Center Marker
Use this setting to display a center marker on the screen.
■
16:9 Markers
Use these settings to superimpose one of 12 markers on the screen when in 16:9 mode.
 4:3
 13:9
Marker Configuration Submenu
23
■
Remote Enable
Use this setting to allow the monitor to be controlled by other monitors on a V-MD Network. Choose Global to allow access
from any monitor or choose Own Webpage Only to only allow the monitor’s web page to control the monitor.
■
Configuration Mode
Use this setting to choose between a DHCP IP address retrieval and Manual IP address selection.
■
IP Address
When using a Manual Configuration Mode, use this field to assign a specific IP address for your monitor. When in DHCP
Configuration Mode, this field will automatically be filled by the IP address assigned by your network.
■
Subnet Mask
When using a Manual Configuration Mode, use this field to assign a specific Subnet Mask for your monitor. When in DHCP
Configuration Mode, this field will automatically be filled by the Subnet Mask assigned by your network.
■
Default Gateway
When using a Manual Configuration Mode, use this field to assign a specific Default Gateway for your monitor. When in
DHCP Configuration Mode, this field will automatically be filled by the Default Gateway assigned by your network.
■
Host Name
Use this field to enter a Host Name for your monitor. You may choose up to 16 alphanumeric characters for the host name.
■
Web Authentication
Use this field to turn Web Authentication ON or OFF. If turned on, you will be asked to select a Username and Password in
the subsequent fields.
Username:15 Alphanumeric character string
Password: 15 Alphanumeric character string
■
MAC Address
This field will show the MAC address associated with the particular monitor in question.