Manual

12
■
Color Temperature
Use this setting to choose one of three color temperature presets:
• D55 (5500K)
• D65 (6500K)
• 9300K
• USER (Adjustable Color Bias and Gain)
• Linear (No processing is applied to the panel)
Use this setting to enable monochrome mode. Only the luminance of the image will be displayed as a grayscale picture.
■
Gamma
Use this setting to choose one of four selectable Gamma tables:
• 1.6
• 1.8
• 2.0
• 2.2
• 2.4
Note: Gamma is disabled when Color Temperature is set to Linear
■
RGB Bias and Gain
Select this submenu to fine-tune the monitor’s color balance (R, G, B). This should only be done by someone experienced
with video engineering, as this will alter the overall color shading of the screen. The purpose is to allow color matching to
other types of monitors and/or displays. Note: The Color Temperature preset will automatically switch to USER when Color
Bias settings are adjusted. It is normal for color bias adjustments to be very subtle.
When selecting the RGB Bias and Gain submenu, gain adjustment indicators will appear at the top of the screen, and bias
adjustment indicators will appear at the bottom of the screen:
Use the ▲ and ▼ buttons to select each individual bias or gain control. Press SELECT to begin adjusting the control. Use the ▲
and ▼ buttons to increase or decrease the value.
Alternately, the image adjustment buttons (Brightness, Color, Tint, Contrast) can be used to easily adjust the bias and gain
settings as shown below. The buttons affect whichever row of controls (gain or bias) is currently selected.
■
Check Field
RGB Bias an
d Gain
25
Marker Config
■
Marker Enable
Use this row to turn the screen markers on an individual screen ON or OFF.
■
Center Marker
Use this row to turn the Center Marker on an individual screen ON or OFF.
■
16:9 Markers
Use this row to set one of several 16:9 markers available on the monitor.
■
Full Screen Markers
Use this row to set one of several Full Screen markers available on the monitor.
■
4:3 Markers
Use this row to set one of several 4:3 markers available on the monitor.
■
Marker Background
Use this row to set the current status of the transparency settings of the screen markers on each individual panel.
Filter Config
■
False Colors
Use this row to turn the False Color filter on an individual screen ON or OFF.
■
Mosquito Filter
Use this row to turn the Mosquito Filter on an individual screen ON or OFF.
System Config
■
Input Format OSD
Use this row set the Input Format OSD timeout length.
■
Curtain Color
Use this row to set the current Curtain Color state.
■
Splash Screen
Use this row to set the splash screen on each individual panel ON or OFF.
■
Freeze Input
Use this row to turn the freeze input function on each individual panel ON or OFF.
■
Contrast/Backlight
Use this row to select what function should be controlled by the CONTRAST buttons on the physical unit or on the Network
Control Page.
■
Load Setup
Use this row to load any of the Setup configuration files available on the monitor.