Operating instructions

6
Top and Front Panel Features
Power Button
Use the power button to toggle between ON and STANDBY
modes. In both the STANDBY and the ON state, the LED on
the button will illuminate bright green. This indicates that
MAIN power is applied to the unit.
Input Select Buttons
Use the VIDEO, YPbPr, S1 and S2 buttons to select the
corresponding analog or digital input. Video standards
(NTSC/PAL, etc.) are automatically detected. S1 and S2
buttons select inputs connected to Optional Input Modules
(located in Slot-1 or Slot-2).
User-Definable Function Buttons
Four user-definable function buttons can be used for direct
access to various settings. Functions are assigned using the on-
screen menu.
Menu Navigation Buttons
Use the Menu, ▲, ▼, and Select buttons to display and
navigate the on-screen menu (See Main Menu and
Navigation).
Image Adjustment Knobs
Use the image adjustment knobs to adjust color brightness,
color-saturation, tint, and contrast of the image. The status of
each image adjustment parameter is shown on the bottom left
of the screen, with values ranging from 0 to 100. Default value
is 50.
LED Tally
Three LED tally lights (yellow, red, green) are available above
the screen.